User manual ZOTAC D2550ITXS-A-E

[. . . ] WARNING! Electronic Emission Notices Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions contained in this manual, may cause harmful interference to radio and television communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] We reserve the right to update the BIOS version presented in the manual. The BIOS pictures shown in this section are for reference only. It is strongly recommended that you do not change the default BIOS settings. Changing some settings could damage your system. This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. Main Menu Note: Users please note that the data in gray is nonchangeable, and the others are for selection. q q 22 BIOS Information Displays the auto-detected BIOS information. CPU Information Displays the auto-detected CPU information. Configuring the BIOS q q q Memory Information Displays the auto-detected memory information. HDD Information Displays the auto-detected HDD information. System Date/Time Allows you to set the system date/time. X-Setting Menu The X-Setting menu items show the settings of voltage control. q q q DRAM voltage Control Use this item to set the DRAM voltage. VCC voltage Control Use this item to set the VCC voltage. CHIP voltage Control Use this item to set the chip voltage. 23 Intel D2550-ITX series Motherboard Advanced Menu The Advanced menu items allow you to change the setting for the CPU and other system devices. Press <enter> to display the configuration options: OnBoard Device Config The items in this menu allow you to set PCI Express port, HD Audio and so on. q PCI Express Port 0/1/2/3 Use this item to set the PCI Express Port. q Launch PXE OpROM Use this item to enable or disable Launch PXE OpROM. q Launch Storage OpROM Use this item to enable or disable Launch Storage OpROM. q Azalia Controller Use this item to set Azalia controller. q Serial Port 0/1 Configuration Press <Enter> to display the serial port configuration. q CIR Controller Configuration Press <Enter> to display the CIR controller configuration. HDD Storage Configuration The items in this menu allow you to set or change the storage configurations. Press <enter> to display the configuration options: q SATA Controller Allows you to configure SATA controller. q Configure SATA as This item allows you to configure SATA as IDE/AHCI mode. 24 Configuring the BIOS The items in this menu show the CPU-related information that the BIOS automatically detects. Press <enter> to display the configuration options: q Hyper-Threading Enable this function for Windows and Linux4 OS, (OS supports Hyper Threading Technology). (OS not optimized for Hyper Threading Technology). q Core-Multi Processing Use this item to enable or disable Core-Multi processing. [. . . ] Left-click Intel Chipset Driver, begin loading 33 Intel D2550-ITX series Motherboard 3. Left-click Realtek Sound Driver, begin loading 4. Left-click Nvidia Graphics Driver, begin loading 34 Installing Drivers And Software 35 Intel D2550-ITX series Motherboard 5. Left-click Realtek Network Driver, begin loading 36 Installing Drivers And Software 6. [. . . ]