User manual ZOTAC H77-ITX

[. . . ] Never insert objects of any kind into the ventilation openings. ™™ Use this product in environments with ambient temperatures between 0℃ and 35℃. , If you use an extension cord, please use the UL listed cord and make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating. Care during use ™™ Do not walk on the power cord or allow anything to rest on it. ™™ Do not spill water or any other liquids on your system. [. . . ] Power switch The power switch turns the mini-PC ON and OFF. IR receiver The IR receiver is used to receive the signal from the IR remote control. Memory card slot The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/ SDXC cards used in devices such as digital cameras, MP3 players, mobile phones and PDAs. Combo eSATA / USB2. 0 port The combo eSATA USB2. 0 port is compatible with eSATA devices such as external hard drives and Blu-ray drives, and USB2. 0 devices. Headphone/SPDIF jack The headphone/SPDIF jack (3. 5mm) is used to connect the system’s audio out signal to amplified speakers or headphones. It also supports SPDIF output with the headphone/SPDIF adapter included in the package. The optical SPDIF output enables connecting the ZBOX nano XS to digital audio receivers and speakers for crystal clear digital audio and surround sound from compatible soundtracks. Microphone jack The microphone jack is designed to connect a microphone for video conferencing, voice narrations or simple audio recordings. Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body. Note 2: Due to the special design for easy upgrade, some connectors are placed upside down. 6 ZOTAC ZBOX nano XS Rear view 1 3 5 2 4 Refer to the diagram below to identify the components on this side of the system. Power input (DC19V) The supplied power adapter converts AC power to DC power for use with this jack. Connecting USB2. 0 device Connect USB2. 0 devices like wired/wireless keyboards (varying with areas), mouse devices and printers to the USB2. 0 ports. 16 ZOTAC ZBOX nano XS Positioning the ZOTAC ZBOX nano XS • Do not cover or block the ventilation holes on ZOTAC ZBOX nano XS. To ensure proper operation and reliability, leave aproximately 4 inches (10 cm) of spacing in front of the ventilation holes. • ZOTAC ZBOX nano XS mini-PC systems provide ample expansion in a miniature form factor, please use connectors and cables that are appropriate in size to avoid interference. Mounting the ZOTAC ZBOX nano XS to a LCD monitor The ZOTAC ZBOX nano XS is monitor-mountable using the included VESA mount. 1. Secure the VESA mount to the LCD monitor using screws (not included). Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation. 2. Align the ZOTAC ZBOX nano XS mounting holes to the VESA mount attachment pegs. Attach the ZOTAC ZBOX nano XS to the VESA mount and gently press down to secure the ZBOX nano XS to the mount. 17 ZOTAC ZBOX nano XS 3. Connect the ZOTAC ZBOX nano XS to your LCD monitor with an HDMI cable. IR receiver Users can control the ZBOX nano XS by either IR receiver or external USB IR receiver. IR receiver Note: Please install CIR driver from DVD before you use the IR receiver. IR receiver 2. The following types of operating systems are supported by the ZOTAC ZBOX nano XS driver DVD: • Windows 7 • Windows 8 Follow the instructions below to install the system drivers: 1. Insert the ZOTAC ZBOX nano XS driver DVD. If autorun is enabled, the driver installation main menu will show up automatically. Note: If autorun is disabled, you can click the file Launch. EXE to bring up the driver installation main menu. 2. The following drivers are available on the DVD: • AMD Chipset Driver • Realtek HD Audio Driver • Realtek Network Driver • MassStorage Driver • CIR Driver • USB Charger (optional) Note: If you want to use USB charger for iPhone/iPad, please install the driver at X:\Utility\Software\Usb Charger\setup. exe (X: your driver disk letter). 21 ZOTAC ZBOX nano XS Note: Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX nano XS. 3. 5. Select the driver you want to install. Follow the onscreen instructions for the selected driver to install. [. . . ] 7. After entering all of the related values, click “OK” to finish the configuration. 22 ZOTAC ZBOX nano XS 1. 2. 3. 4. 5. 6. Repeat Step 1-3 in the previous section. Select “Obtain an IP address automatically” and click “OK”. Click “Create a new connection” to start the NEW Connection Wizard. Select “Connect to the Internet” and click “Next”. [. . . ]