User manual ZYXEL NWA-3163 QUICK GUIDE

[. . . ] If you cannot access the Web configurator, make sure the IP addresses and subnet masks of the NWA1100 and the computer are in the same IP address range. Enter 1234 (the default password) in the Password field and click Login. Be sure to record the new password and keep it in a safe place. If you change the password and then forget it, you will need to reset the NWA1100. [. . . ] Choose a distinctive name, or leave this at its default. DNS Server(s): if your ISP gave you specific DNS (Domain Name System) settings, select User-Defined and enter them here. Otherwise, leave these fields at their defaults. Wireless Mode: Select the wireless standard you want your network to use. If you are not sure which to select, select 802. Channel: Select the wireless channel you want your network to use. If you don't configure wireless security, anyone can access your network. This is where you can enter the security settings for your wireless network. The fields you fill in differ according to the type of security you select in the Security Mode field. Select None if you do not wish to use wireless security. This example uses WPA2-PSK security, in which all wireless clients must use the same pre-shared key to join the network. Do not screw the screws all the way in to the wall; leave a small gap between the head of the screw and the wall. The gap must be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the NWA1100. Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the NWA1100 with the connection cables. Run the connection cables down the back of the NWA1100 as shown in the following figure. Align the holes on the back of the NWA1100 with the screws on the wall. Power over Ethernet (PoE) is the ability to provide power to your NWA1100 via an 8-pin CAT 5 Ethernet cable, eliminating the need for a nearby power source. A PoE injector (not included) is also needed to supply the Ethernet cable with power. This feature allows increased flexibility in the location of your NWA1100. In the following figure, Z is your NWA1100, A is the CAT 5 Ethernet cable, B is the PoE injector and C is the power cable. Wenn Sie eine IP-Adresse haben, wählen Sie die Option Use fixed IP address (Feste IP-Adresse verwenden) und geben Sie sie zusammen mit der SubnetzMaske und der Gateway-IPAdresse ein. Wenn Sie eine bestimmte IP-Adresse haben, wählen Sie die Option Use fixed IP address (Feste IP-Adresse verwenden) und geben Sie sie zusammen mit der Subnetz-Maske und der Gateway-IP-Adresse ein. [. . . ] Si tiene una dirección IP específica para usar, seleccione Use fixed IP address (Utilizar dirección IP fija) e introdúzcala junto con su máscara de subred y puerta de enlace IP. Si vous avez une adresse IP spécifique à utiliser, sélectionnez Use fixed IP address (Utiliser une adresse IP fixe) et entrezla avec le masque de sous-réseau et l'adresse IP de passerelle. Se si dispone di un indirizzo IP specifico da utilizzare, selezionare Use fixed IP address (utilizza indirizzo IP fisso) e specificarlo unitamente al subnet mask e all'indirizzo IP gateway. Get automatically from DHCP ( DHCP), , IP- NWA1100 DHCP . [. . . ]