User manual ZYXEL OMNI 56K PLUS QUICK GUIDE V1.0.0

[. . . ] Use the included phone cord to connect to a phone jack on the wall. Turn on your computer and insert the included CD. Connect one end of your USB cable to your USB Plus and the other end to your computer's USB port. 4 Omni 56K Plus Modem Quick Start Guide Figure 1 USB Cable (Type A) Computer End Figure 2 USB Cable (Type B) Device End Figure 3 Rear Panel Connections 3. 2 COM Plus The Front Panel LEDs LED HS FUNCTION V. 92 Ready STATUS ON OFF DESCRIPTION A V. 92 modem link is established. A V. 92 modem link is not established. 5 Omni 56K Plus Modem Quick Start Guide LED OH FUNCTION Hook Status STATUS ON OFF DATA RS232 Status Modem Ready ON OFF ON OFF DESCRIPTION The phone is in off-hook status (the telephone line is busy). [. . . ] 6. Follow the procedures of Plug and Play installation to finish the driver installation. After the ZyXEL Omni 56K USB Plus modem has been installed successfully, click Finish. 4. 2 COM Plus Follow the steps below to install your COM Plus modem driver. Screens for Windows 2000 are shown here. 10 Omni 56K Plus Modem Quick Start Guide 1. Click Start, select Settings to enter Control Panel. Double-click on the Phone and Modem Options icon (or the Modems icon) as shown, click the Modems tab and the Add button. Click Next to continue. 3. 4. Please wait while Windows detects the modem. 5. Click Next to continue. You see this screen if Windows successfully detects your modem. If it doesn't, you may unplug the RS-232 cable and plug it in again. If this does not work, unplug the cable and restart your computer, then plug the cable back in. 11 Omni 56K Plus Modem Quick Start Guide 6. Click Next to accept the default selection. 7. Windows 95/98 SE/Me/2000: If you insert the CD included into your CD-ROM drive, select CDROM drives and then click Next. If you have the driver stored on your computer, select Specify a location, click Next, Browse to find the INF file you want to upload and then click OK. Remember that you must decompress compressed (. zip) files before you can upload them. Windows 95/98 SE/Me/2000: The installation wizard has found the location of your driver. Click Next to continue and Windows will copy the driver files into your system as well as build the driver information database. 12 8. Omni 56K Plus Modem Quick Start Guide 9. Click Finish to finish installing the software. 10. After the ZyXEL Omni 56K COM Plus modem has been installed successfully, click Finish. 5 Dial-up Networking Use the connection wizard to setup your dial-up networking connection. Use the information from your ISP to fill in the wizard screens. Windows creates an icon for your dial-up connection after you finish. Double-click the icon to connect to your ISP. Enter the user name and password that your ISP gave you. [. . . ] If the error persists, you may have a hardware problem. In this case, you should contact your local vendor. Click Start, Control Panel, double-click Phone and Modem Options (or Modems). If ZyXEL OMNI 56K USB Plus is not present, install the modem driver. [. . . ]