User manual 100NITROUS HANSPREE HANSPAD 10.1

[. . . ] This icon indicates notes and information that should be read before using the camera. These icons indicate other pages containing relevant information; E: “Reference Section”, F: “Technical Notes and Index. ” • SD and SDHC/SDXC memory cards are referred to as “memory cards” in this manual. • The setting at the time of purchase is referred to as the “default setting. ” • The names of menu items displayed in the camera monitor, and the names of buttons or messages displayed on a computer monitor appear in bold. • In this manual, images are sometimes omitted from monitor display samples so that monitor indicators can be more clearly shown. [. . . ] • Red-eye correction can be applied to pets (dogs or cats) even if their eyes are not red. • Red-eye correction may not produce the desired results in some images. • In some rare cases, red-eye correction may be applied unnecessarily to other areas of the image. Reference Section E16 Glamour Retouch: Enhancing Human Faces Press the c button (playback mode) M select an image M d button M Glamour retouch M k button 1 Use the multi selector HIJK to select the face that you want to retouch and press the k button. • When only one face is detected, proceed to step 2. Subject selection Back 2 Use JK to select the effect, use HI to select the effect level, and press the k button. Skin softening • You can simultaneously apply multiple effects. Adjust or check the settings for all effects Back before pressing the k button. F (small face), B (skin softening), C (powder), m (glare reduction), E (hide eye bags), A (big eyes), G (whiten eyes), n (eye shadow), o (mascara), H (whiten teeth), p (lipstick), D (redden cheeks) • Press the d button to return to the screen for selecting a face. 3 2 1 Reference Section 3 Preview the result and press the k button. • To change the settings, press J to return to step 2. • To exit without saving the edited image, press the d button. Preview Save 4 Select Yes and press the k button. • An edited copy is created. Save OK?Yes No E17 B Notes About Glamour Retouch • Only one face can be edited at a time using the glamour retouch function. The function can be used for up to ten faces (up to ten times) on the same image if you edit a different face each time. • Depending upon the direction in which faces are looking, or the brightness of faces, the camera may be unable to accurately detect faces, or the glamour retouch function may not perform as expected. • If no faces are detected, a warning is displayed and the screen returns to the playback menu. • The glamour retouch function is available only for images captured when the ISO sensitivity is 1600 or lower. Small Picture: Reducing the Size of an Image Press the c button (playback mode) M select an image M d button M Small picture M k button 1 Reference Section Use the multi selector HI to select the desired copy size and press the k button. • Images taken at an image mode setting of l 4608×2592 are saved at 640 × 360 pixels. • Use the multi selector JK to select images, and use HI to specify the 1 1 3 number of copies to be printed. • Images selected for printing are indicated by M and the numeral Back indicating the number of copies to be printed. If no copies have been specified for images, the selection is canceled. • Move the zoom control toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail playback. • Press the k button when setting is complete. • When the screen shown on the right is Print selection displayed, select Start print and press the k button to start printing. 10 prints Start print Cancel Print all images One copy each of all images saved in the internal memory, or on the memory card, is printed. • When the screen shown on the right is displayed, select Start print and press the k button to start printing. Print all images Reference Section 18 prints Start print Cancel DPOF printing Print images for which a print order was created using the Print order option (E45). • When the screen shown on the right is displayed, select Start print and press the k button to start printing. To view the current print order, select View images and press the k button. To print images, press the k button again. DPOF printing 10 prints Start print View images Cancel E26 Editing Movies Extracting Only the Desired Portion of a Movie The desired portions of a recorded movie can be saved as a separate file. 1 2 Play back the desired movie and pause at the start point of the portion that is to be extracted (A76). Use the multi selector JK to select I in the playback controls, and then press the k button. 1m30s 3 Use HI to select M (Choose start point) in the editing controls. • Use the multi selector JK or rotate it to move the start point. [. . . ] 75, E55, E56 Red-eye correction. . . . . . . . . . 70, E7 Reset all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, E77 Rotary multi selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 4, 28, 44 Rotate image . . . . . . . . . . . . . . . . . . . . . . [. . . ]