User manual 3COM SS 3 SERVER LOAD BALANCER PLUS

[. . . ] SuperStack® 3 Server Load Balancer Server Load Balancer Plus User Guide 3C16120 3C16121 http://www. 3com. com/ Part No. 990-0049-00 Published June 2001 3Com Corporation 5400 Bayfront Plaza Santa Clara, California 95052-8145 Copyright © 2001, 3Com Technologies. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Technologies. 3Com Technologies reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3Com Technologies to provide notification of such revision or change. [. . . ] To create a cache subnet, complete the following steps: 1 Click Logical View on the Toolbar. 2 From the Navigation tree, select System > Setup > Cache Subnets. The Cache Subnet - Configure Address page appears. 5 Enter 192. 168. 3. 200 in the Device A IP Address field. 6 Enter 192. 168. 3. 100 in the Device B IP Address field. 7 Enter 255. 255. 255. 0 in the Subnet Mask field. The Cache Subnet - Device A Floating Address page appears. 9 Complete the entry in the Device A Floating Address field. This is the floating default gateway IP address. Do not forget to change the default gateway on your caches to this IP address. 10 Click Next. Your cache subnet has been added. Adding a Cache 57 Adding a Cache This is where the cache service is defined, along with several attributes of the service. 2 Point to the Cache window border and left-click the mouse button. If you have not defined a cache subnet, you will be prompted with a Warning message asking if you wish to define the cache subnet now. See "Defining a Cache Subnet" on page 58. 4 Complete the entry in the IP Address field. There are two available cache types: I I Transparent Proxy 7 Click Done. Assigning Caches to Services The Assign Caches to Services page is where the caches are assigned to cache redirection. The Cache Assignments button is highlighted only if an HTTP service has been created. The Assign Caches to Services page appears. 2 Click on the cell to assign a cache service. The Assign cache to service pop-up menu appears. 5 Repeat the above steps for each of the caches you have created. 58 CHAPTER 7: CONFIGURING CACHE REDIRECTION Showing Status and Deleting the Cache To view the status of the cache assignments, complete the following steps: 1 Click Cache Assignments. The Assign Caches to Services page appears 2 Click the cell for Cache1. [. . . ] To check that your product and location qualify for the next business day advance hardware replacement see http://support. 3com. com/registration/docs/hw_repl. html. FREE telephone technical support for 12 months with real-time call handling during normal business hours 2. Please refer to the Technical Support appendix in the User Guide for telephone numbers. Find out more when you register online at: http://support. 3com. com Shipment of a Replacement Prior to 3Com Receiving the Defective Product only if Customer provides a purchase order number, credit card number, or other method of payment acceptable to 3Com, to be used if 3Com needs to charge Customer for the replacement, as explained below. [. . . ]