User manual 3COM WL-552

[. . . ] OfficeConnect ADSL Wireless 54 Mbps 11g Firewall Router User Guide ® WL-552 3CRWDR101A-75 3CRWDR101B-75 http://www. 3Com. com/ Part No. AA Published March 2006 3Com Corporation 350 Campus Drive, Marlborough, MA USA 01752-3064 Copyright © 2004, 2005, 2006, 3Com Corporation. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation. 3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3Com Corporation to provide notification of such revision or change. [. . . ] The default rule is either Allow or Deny None of the above (Uncategorized URL). You can configure this rule at the bottom of the Content Filter screen. Firewall 79 4 If you are not sure about your subscription status, click CHECK in Subscription Filtering Status to find out if you have a current, valid subscription. 5 Subjects are listed under Core Categories and Productivity Categories. You can define what content should be viewed/blocked using the Allow/Deny option. The Deny option is used to filter out the content that contains the specific subject matter. Content with a specific subject matter will not be filtered out if the Allow option is checked. 6 Click Apply for the changes to take effect. Server Control The Router can be configured to restrict access to the Internet, email or other network services at specific days and times. You can define the traffic type permitted or not-permitted to the Internet. Figure 65 Server Control Screen In the Service Filtering Mode, select one option: Denied except listed below. All Allowed. Click Add to add a new entry to the table (see Figure 66). 80 CHAPTER 5: CONFIGURING THE ROUTER Figure 66 Server Control Add Server Screen 1 Enter a description in the Server Description field, and the IP address or IP address range into the Server IP Address fields. 2 Select the services that will be allowed. A list of popular services is given on this screen, to unblock a particular service, check the appropriate Allowed checkbox. If the service to be allowed is not listed here, you can enter a custom range of ports at the bottom of the screen, under User Defined Service Ports. 3 Select the time that the rule will be enforced from the Scheduling Rule drop-down menu. 4 Click Apply to save the settings. Quality of Service 81 Quality of Service The QoS (Quality of Service) function allows you to differentiate your network traffic and provide it with high-priority forwarding service. The bandwidth gap between LAN and WAN may significantly degrade performance of critical network applications, such as VoIP, gaming, and VPN. This QoS function allows you to classify traffic of applications and provides them with differentiated services (Diffserv). Figure 67 QoS Settings Screen QoS Settings Define the minimum percentage of bandwidth for each type of traffic. Traffic Mapping You can define up to 16 rules to classify traffic into Diffserv forwarding groups and outgoing VCs in this screen. Figure 68 Traffic Mapping screen 82 CHAPTER 5: CONFIGURING THE ROUTER Click Add to add a new traffic class rule (see Figure 69). Figure 69 Add New Traffic Class Rule Screen Traffic Statistics This screen shows the WAN outbound traffic statistics of all the Diffserv forwarding groups in the last 12 hours. This screen automatically updates every 5 minutes. Figure 70 Traffic Statistics Screen Advanced 83 Advanced From the Advanced screen, you can configure: Security Static Routes RIP DDNS SNMP Syslog Proxy Arp Security Use the Security screen to set the advanced security settings for the Router. Figure 71 Security Screen NAT -- Before you enable NAT (Network Address Translation), make sure you have changed the administrator password. NAT is the method by which the Router shares the single IP address assigned by your ISP with the computers on your network. This function should only be disabled by advanced users, and if your ISP assigns you multiple IP addresses or you need NAT disabled for an advanced system configuration. If you have a single IP address and 84 CHAPTER 5: CONFIGURING THE ROUTER you turn NAT off, the computers on your network will not be able to access the Internet. [. . . ] 60950-1 IEC 60950-1 EN 60950-1 EU COMPLIANCE For connection to ADSL networks This equipment may be operated in: AT DE MT GB BE GR NL IS CY HU PL LI CZ IE PT NO DK IT SK CH EE LV SI BG FI LT ES RO FR LU SE TR 139 Intended use: ADSL 802. 11g/b Firewall Router For connection to ADSL networks NOTE: To ensure product operation is in compliance with local regulations, select the country in which the product is installed. Refer to 3CRWDR101A-75 User Guide. Cesky [Czech] 3Com Coporation tímto prohlasuje, ze tento RLAN device je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Undertegnede 3Com Corporation erklærer herved, at følgende udstyr RLAN device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Hiermit erklärt 3Com Corporation, dass sich das Gerät RLAN device in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. [. . . ]