User manual 3COM WX5002ACCESSCONTROLLER

[. . . ] H3C WX5002 Access Controller Installation Manual Hangzhou H3C Technologies Co. , Ltd. Manual Version: T2-080410-20090605-C-1. 02 Copyright © 2007-2009, Hangzhou H3C Technologies Co. , Ltd. and its licensors H3C Technologies Co. , Ltd. , a subsidiary of 3Com Corporation. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co. , Ltd. Trademarks H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co. , Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. About This Manual Organization H3C WX5002 Access Controller Installation Manual is organized as follows: Chapter 1 Product Overview Contents Introduces the features and appearance of the H3C WX5002 access controller. [. . . ] Table 5-1 BootWare main menu Menu item <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Modify BootWare Password <6> Ignore System Configuration <7> BootWare Operation Menu <8> Clear Super Password <0> Reboot Boot the system Enter the serial submenu. For detailed description, refer to Serial submenu. For detailed description, refer to Ethernet submenu. For detailed description, refer to File control submenu. Boot the system with the system configuration ignored BootWare operation submenu. For detailed description, refer to BootWare operation submenu. Description BootWare Submenus Serial submenu You can upgrade application programs, change the serial interface baud rate and so on through this submenu. Select 2 in the BootWare main menu to enter the serial submenu. ======================<SERIAL SUB-MENU>====================== | <1> Download Application Program To SDRAM And Run | <2> Update Main Application File | <3> Update Backup Application File | <4> Update Secure Application File | | | | 5-4 | <5> Modify Serial Interface Parameter | <0> Exit To Main Menu | | ============================================================= Enter your choice (0-5): Items in this submenu are described in the following table. Table 5-2 BootWare serial submenu Menu item <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update Secure Application File <5> Modify Serial Interface Parameter <0> Exit To Main Menu Description Download an application program to SDRAM and run the program. Return to the BootWare main menu. Ethernet submenu Select 3 in the BootWare main menu to enter the Ethernet submenu. The system displays: ====================<ETHERNET SUB-MENU>====================== | <1> Download Application Program To SDRAM And Run | <2> Update Main Application File | <3> Update Backup Application File | <4> Update Secure Application File | <5> Change Ethernet Parameter | <0> Exit To Main Menu | < Ensure The Parameter Be Modified Before Downloading!> | | | | | | | ============================================================= Enter your choice (0-5): Items in the Ethernet submenu are described in the following table. Table 5-3 Ethernet submenu Menu item <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update Secure Application File <5> Change Ethernet Parameter <0> Exit To Main Menu Description Download an application program to SDRAM and run the program. Return to the BootWare main menu. 5-5 File control submenu Select 4 in the BootWare main menu to enter the file control submenu. You can view the application file types, modify file names, and delete files through the submenu. ========================<FILE CONTROL>======================= | <1> Display All File(s) | <2> Set Application File Type | <3> Delete File | <0> Exit To Main Menu | | | | ============================================================= Enter your choice (0-3): Items in this submenu are described in the following table. Table 5-4 File control submenu Menu item <1> Display All File(s) <2> Set Application File Type <3> Delete File <0> Exit To Main Menu Display all files. Description BootWare operation submenu Select 7 in the BootWare main menu to enter the BootWare operation submenu: =====================<BOOTWARE OPERATION>==================== | <1> Backup Full BootWare | <2> Restore Full BootWare | <3> Update Full BootWare With XModem | <4> Update Extend BootWare With XModem | <5> Update Basic BootWare With XModem | <0> Exit To Main Menu | | | | | | ============================================================= Enter your choice (0-5): Items in this submenu are described in the following table. Table 5-5 BootWare operation submenu Menu item <1> Backup Full BootWare <2> Restore Full BootWare <3> Update Full BootWare With XModem <4> Update Extend BootWare With XModem <5> Update Basic BootWare With XModem <0> Exit To Main Menu Description Back up the full BootWare. Upgrade the extended BootWare using XMODEM. Upgrade the basic BootWare using XMODEM. Return to the BootWare main menu. 5-6 Upgrading BootWare Through a Serial Interface Use XMODEM to upgrade BootWare through a serial interface. Modifying Serial Interface Parameters Sometimes, we need to make the serial interface baud rate higher to save upgrading time or make it lower to guarantee transmission reliability. This section introduces how to adjust the serial interface baud rate. [. . . ] Verify the following terminal parameter (such as HyperTerminal) settings: 6-1 Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Emulation: VT100. 6-2 Table of Contents Appendix A Obtaining Support for your Product····················································································· A-1 Register Your Product···························································································································· A-1 Purchase Value-Added Services ··········································································································· A-1 Troubleshoot Online······························································································································· A-1 Access Software Downloads ················································································································· A-1 Telephone Technical Support and Repair ····························································································· A-1 Contact Us ············································································································································· A-2 i Appendix A Obtaining Support for your Product Register Your Product Warranty and other service benefits start from the date of purchase, so it is important to register your product quickly to ensure you get full use of the warranty and other service benefits available to you. Warranty and other service benefits are enabled through product registration. Register your product at http://www. h3cnetworks. com, go to Support, Product Registration. Support services are based on accounts that you create or have authorization to access. [. . . ]