User manual 3J USB-W1D

[. . . ] Multi-language caller ID display feature 8. Auto-select RF channel to improve the quality of voice 1. 3 Technical Data Standby time: More than 100 hours Talk time: More than 10 hours Radio range: 10 meters (32 ft) Battery: 250mAh (Li-battery) 1 1. 4 System Requirements 1. 400MHz processor and free USB1. 1 or USB2. 0 port 3. Any broadband connection or minimum 33. 6 Kbps dialup 2 Using the USB Wireless Phone Contacts (1) Press to display the contacts list, press / (2) Press the LCD. [. . . ] to call out. 2. 6. 3 Call Skype user from call list (1) Go back to ready state, press (2) Press (3) Press / to call out. / to display the call list. again to select a contact. 2. 6. 4 Call Skype user by Speed-Dial That indicates the device and Skype are connected successfully. If the icon shown as (the phone is green and the outside is grey), please run Skype first. 8 9 (1) Add a friend (for example: bbc456) to Contacts (2) Assign Speed-Dial for it, for example "11" 2. 6. 6 Activate Handfree while making a call (1) Enter the number on the handset's keypad and press call out. (2) Press the Handfree key, the speaker light will flash. (5) Press the Handfree key to end talking. (3) Input number and call out: Press digital "11" on the handset's keypad, then press call out. 2. 6. 5 Call to regular phone Press "00" + "country number" + "phone number", then press . Example: call someone in Beijing, China, please press 00861012345678, and then press 0086 ---------------country code Note: 10 ---------city code . 12345678 -------------------destination number to to 2. 7 Answer a call 2. 7. 1 Answer a call via handset When a call comes in, both of the base and the handset will ring. Press to answer the call, or press to refuse it. 2. 7. 2 Answer a call via base (1) When a call comes in, both the base and the handset will ring. (2) Press Handfree key again to end the call. (1) You can input "+" instead of "00". (2) If you want to use this function, you should buy SkypeOut Credit from www. skype. com first. 10 11 2. 8 State Instruction (1) Ready state a. Missed call 2. 9 Advanced (1) Right click the icon on the taskbar and select Advance (2) The window is shown as below: (2) The icons displayed in call list a. Missed call (3) Battery condition (3) Run when Windows starts: Select to enable this feature. SkypeOut The SkypeMate will be launched automatically when Windows starts. (4) Refuse Skype call when Skype talking: Select to enable this feature. The second incoming Skype call will be refused when talking. (5) Display Skype window when calling (see the picture in below page): If you cancel this option, when you press the digital keys 0-9, *, #, the Skype windows will not pop up (except incoming call and outgoing call). (6) Click the button "OK" to save the setup. 12 13 2. 10 Auto-select RF channel This function is effective to improve the quality of handset's voice. The handset will change the RF channel automatically when the voice is not so good. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]