User manual 3M 02-2004 BENCH MOTOR DEBURRING

[. . . ] Application Profile Market: MRO Application Description: Bench Motor Deburring 8" Deburring Aluminum Extrusion 6" Deburring Aluminum Extrusion Key Application Requirements Bench motor deburring, where the operator brings the part to the brush and manipulates it for deburring. Examples include deburring aluminum extrusions, metal tubing, sheared panels medical instruments, builders hardware, piston rings and threaded parts. PRODUCTS Scotch-BriteTM Radial Bristle Brush 6" Type T-A Grade 36 (brown) 048011-27603-8 Grade 50 (green) 048011-27605-1 Grade 80 (yellow) 048011-27606-9 6" Type T-C Products Replaced Wire and nylon brushes. Advantages/Benefits for customer Safer and cleaner -- Scotch-Brite Radial Bristle Brushes feature a unique design that provides a clean and safe system for deburring. [. . . ] ­ Do not work bristle over sharp edges, when finishing edges on a flat surface; position the tool so that the bristles run off the edge and not into the edge. ­ Do not dwell on a localized area to avoid excessive heat build up. Additional Information Scotch-Brite Radial Bristle Brush, 8-inch: product flyer (61-5002-8041-9) Scotch-Brite Bristle Discs and Brushes: product family brochure (61-5002-8009-6) Market: MRO Application Description: Bench Motor Deburring page 3 Safety Information Always read and follow all safety information included with the product. Do not exceed maximum operating RPM's. Follow safety operation procedures posted in work areas. To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. [. . . ] Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. For Additional Information Product Use Warranty and Limited Remedy Limitation of Liability Scotch-Brite is a trademark of 3M. Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106 MRObmotorsb. pdf © 3M 2004 IBD4107 [. . . ]