User manual 3M 3M-MATIC 800ASB SIDE BELT ADJUSTABLE CASE SEALER

[. . . ] These case styles include five panel folds, full overlap, telescoping, and tuck fold. The 3M-Matic L-Clip Applicator S-867 provides a cost-effective, time-saving solution by applying L-clips of tape securely and with less effort. TM Consistent tape length · Conserves tape with virtually no waste Easy versatile placement · Small footprint of only 31" x 29"x 11" Semi-automatic unit applies pre-fed 4. 5" L-clips of Scotch® Filament Tapes and Scotch® Box Sealing Tapes at up to 50 clips per minute. [. . . ] The 3M-Matic L-Clip Applicator S-867 provides a cost-effective, time-saving solution by applying L-clips of tape securely and with less effort. TM Consistent tape length · Conserves tape with virtually no waste Easy versatile placement · Small footprint of only 31" x 29"x 11" Semi-automatic unit applies pre-fed 4. 5" L-clips of Scotch® Filament Tapes and Scotch® Box Sealing Tapes at up to 50 clips per minute. This innovative process eliminates the set time and waste of water-activated tape and the sharp points of staples. Full pneumatic operation with no electric power needed. Access cover Features include: · Air pressure and flow controls optimally positioned to reduce unnecessary operator adjustments, improve ease of maintenance access, and add floor layout versatility · Ability to position taping heads closer together to apply clips as close as 8" apart · Oil-less operation to reduce maintenance · Wide selection of tape widths: 9mm, 12mm, 15mm, 18mm, 24mm, and 36mm. Easy and intuitive to use, the 3M-Matic Applicator S-867 makes consistent corner closures quickly and efficiently with minimal operator training. · Easy open access for tape threading · Automatically shuts off air pressure when opened Industrial-duty construction · Heavy-duty one-piece steel frame · Tough powder-epoxy coating paint Box capacities Optional single head stand · For mounting and case handling 2 Length: 2. 25" to unlimited Width: 5" to unlimited Height: 2. 25" to unlimited Case-activated switch plate · Safely activates unit when case is pressed against the plate Air shut-off · Conveniently located for quick access 4 Optional multi-head configurations with dual head stand · Applies L-clips side by side for long cases · Positions L-clips as close as 8" apart Air pressure and flow controls · Positioned for easy maintenance 5 Optional U-Clip adapter · Applies U-Clips of tape to lower profile cases 3 3M-MaticTM L-Clip Applicator S-867 Specifications: Box: Bottom taping position: Size: Min Max Height 2. 25" (60mm) No limit Width 5" (130mm*) No limit Depth 2. 25" (60mm) No limit Top taping position: Size: Min Max Height 2. 25" (60mm) No limit Width 5" (130mm*) No limit Depth 2. 25" (60mm) No limit Note: Operator will determine maximum height, width, length, and weight. Please contact your 3M sales professional for assistance in determining proper equipment layout and set-up, or call 1-800-362-3550. Width: 3/8 inch [9mm] minimum to 1 1/2 inch [36mm] maximum Roll diameter: up to 15 inches [380mm] maximum on a 3 inch [76. 2mm] diameter core. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error. Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory. The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller. 3 Industrial Business Industrial Adhesives and Tapes Division Bldg. [. . . ] 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error. Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory. [. . . ]