User manual 3M 3M-MATIC 800R RANDOM SIDE DRIVE BELT CASE SEALER

[. . . ] Visit the site to read the latest projector news and reviews, read and comment on projector specifications, download user manuals and much more. 3M-MATIC 800R RANDOM SIDE DRIVE BELT CASE SEALER/X50 Multimedia Projector Operator's Guide wn loa de d fro m Pr oje c to r . c Thank you for purchasing this projector. CAUTION Please read the "Product Safety Guide" and this "Operator's Guide" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. TRADEMARK ACKNOWLEDGEMENT : CONTENTS m Page Pr · PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation. · Apple, Mac and ADB are registered trademarks of Apple Computer, Inc. [. . . ] TURN OFF: A non-patterned (plain) blue color screen. · The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several minutes after being displayed. Pr Selection of BLANK Screen: MyScreen ORIGINAL . . The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen has been erased (i. e. , made to vanish) by manipulating the BLANK button (please refer to the "Temporarily Blanking the Screen" section). MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen (or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen. Please make confirmation using the actual screen(s). Option screens: Various colored non-patterned (plain) screens displayed within the Menus. · The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed. oje c to r . c : SELECT MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION BLANK START UP MyScreen MyScreen Size MyScreen Lock MyScreen ORIGNAL Example : SCREEN Menu (BLANK) 27 MULTIFUNCTIONAL SETTINGS (continued) OPTION Menu MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION VOLUME AUTO OFF WHISPER LAMP TIME FILTER TIME With the OPTION menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table. OPTION Menu Item VOLUME Adjust Volume: High Description Low AUTO OFF WHISPER LAMP TIME wn loa FILTER TIME 28 de d Refer to LAMP TIME: When set, this function displays the total time the projector lamp has been used since new. Reset LAMP TIME [Use this function only when the lamp has been replaced!]: Depress the RESET button for at least 3 seconds while lamp time is being displayed. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer's hardware manual for details. · The USB control can be used with Windows 95 OSR 2. 1 or higher. It may not be possible to use the remote control, depending on the computer's configurations and mouse drivers. · The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally). · This function is not available while the lamp is warming up (the power indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen. oje Press ENTER button Press RESET button Press PAGE UP button Press PAGE DOWN button 1. Turn off the projector and PC power, and connect the projector's control terminal to the computer via the mouse cable. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the control terminal will not function. Turn on the projector power, then the computer. [. . . ] 78-6969-9716-8 S-Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-8118-3238-1 Mouse Cable (PS/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-8118-8105-7 Mouse Cable (Serial) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-8118-8107-3 Mouse Cable (ADB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]