User manual 3M BOND ALUMINUM FLOORING TO ALUMINUM SUPPORTS COMMERCIAL REFRIG

[. . . ] Application Profile Market: Metal Fabrication Application Description: Bond aluminum flooring to aluminum supports for commercial refrigeration equipment housing Aluminum Floor Panel Floor Supports 3MTM VHBTM Tape 4941 Key Application Requirements High initial and ultimate bond strength, easy to apply, temperature resistant, aesthetically pleasing (smooth look), ability to damp vibrations. PRODUCT 3MTM VHBTM Tape 4941 Product Replaced A slow curing liquid adhesive system that required extra time for cleanup; mechanical fasteners. Benefits/Advantages To Customer Easy to use/apply: 3MTM VHBTM Tape is applied to the cleaned surface of the floor supports and firmly pressed in place. The liner is removed and the floor panels are pressed onto the taped supports. [. . . ] The liner is removed and the floor panels are pressed into place. A J-roller can be used to apply the appropriate pressure required to ensure good adhesive contact over the floor panel and support bonding areas. Note: VHB tapes should be tested for adhesion level and compatibility to the paint system on the specific surfaces to be bonded. Surface Preparation IPA/Water should be used to clean all surfaces to be bonded. Abrasion is sometimes suggested, depending on the adhesion level determined in testing. Testing for adhesion levels is very important. Note: Follow solvent manufacturer's precautions and directions for use when using cleaning solvents. SIC Codes 3556 ­ Commercial and Industrial Refrigeration Equipment Related Application · Attaching stiffeners to metal tables and equipment. · Attaching metal skins to frames. Key Decision Makers Product Manager, Design Engineer, Production Manager, Plant Manager For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. In Mexico, phone: 52-70-04-00. Important Notice User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. [. . . ] 3M shall not otherwise be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144 Printed in USA Mfcooler4941. pdf © 3M 2003 [. . . ]