User manual 3M BOND STIFFENERS TO GARAGE DOORS

[. . . ] Application Profile Market: Construction Application Description: Bond stiffeners to Garage Doors 3MTM VHBTM Tape 5952 Key Application Requirements High initial and ultimate bond strength; easy to apply; temperature resistant (-40° to 200°F/-40° to 93°C); aesthetically pleasing (smooth look); ability to damp vibrations. PRODUCT 3MTM VHBTM Tape 5952 Product Replaced Liquid adhesives and mechanical fasteners had been previously used. Benefits/Advantages To Customer Easy to use, quick to apply: 3MTM VHBTM Tape is applied to the cleaned surface of the backside of the metal stiffener and pressurized. The liner is removed and the taped stiffener is applied and pressurized to the metal garage door skin. [. . . ] 3MTM VHBTM Tape 5952 bonds well to most painted metals and plastics without surface priming or abrading. The specially formulated synthetic adhesive bonds to most paints and powder coats. 3M Industrial Business Process 3MTM VHBTM Tapes are applied to the clean surface of the metal stiffener. The liner is removed and the stiffener is pressed into place on the metal skin of the garage door. A J-roller can be used to apply the appropriate pressure required to ensure good adhesive contact to the stiffener. Surface Preparation IPA/Water should be used to clean all surfaces to be bonded*. Testing for adhesion levels is very important. *Note: Carefully read and follow solvent manufacturer's precautions and directions for use when using solvents. Related Application Ideas Bonding stiffeners to hollow metal doors. SIC Codes 34420000 ­ Metal Garage Doors Key Decision Makers Engineering Manager Production Manager Plant Manager For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. In Mexico, phone: 52-70-04-00. Important Notice User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. [. . . ] 3M shall not otherwise be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144 Printed in USA Cgdstiff5952. pdf © 3M 2003 [. . . ]