User manual 3M BONDING CORNER OF WINDOW FRAME

[. . . ] Application Profile Market: Construction Application Description: Bonding corner of the window frame. yyyyy ;;;;; yy ;; yyyyy ;;;;; y ; yyyyy ;;;;; y ; yyyyy ;;;;; y ; Key Application Requirements Fast set time; strong bond to vinyl or wood; easy to apply; temperature resistant (to PRODUCT 3MTM Scotch-WeldTM Polyurethane Reactive Adhesive TE-031 160°F/71°C). Product or Process Replaced Thermally welded vinyl corner, which was strong, but required a secondary trimming operation to remove a flash that was generated by the thermal weld. Benefits/Advantages To Customer Easy to use, quick to apply: The adhesive is dispensed through the 3MTM Jet-WeldTM II Adhesive Applicator. [. . . ] Resists environmental conditions: The adhesive withstands the elevated temperatures of the window environment. 3M Industrial Business Process 3MTM Scotch-WeldTM Polyurethane Reactive Adhesive TE-031 is extruded into the corner of the window frame through the holes in the corner section profiles. A corner "key" (molded plastic L-shaped part, which fits into a "key-way" in the profile) is commonly used to form the corner bond. SIC Code 2431 ­ Millwork, Door and Window Units 3089 ­ Plastic Products, Doors, Window Frames and Sash 3442 - Metal Doors, Sash, Frames, Molding, and Trim Key Decision Makers Production Manager Plant Manager Product Manager For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. [. . . ] Paul, MN 55106 "Jet-Weld" is a trademark of 3M. Printed in USA CwcTE031. pdf © 3M 2005 [. . . ]