User manual 3M BONDING EPS FOAM INSULATION TO STAINLESS STEEL HPL PWD

[. . . ] Application Profile Market: HVAC/Refrigeration Application Description: Bonding EPS foam insulation to the stainless steel and HPL plywood panels of a commercial refrigerator. ABCE Application Method 3M Fastbond 2000-NF Contact Adhesive can only be co-spray applied; hand and automated systems are available. TM TM PRODUCT 3MTM FastbondTM 2000-NF Water-based Contact Adhesive Key Application Requirements Must be as fast as solvent-based contact adhesives. 3M Fastbond 2000-NF Contact Adhesive is an ideal replacement for many solvent-based adhesives. [. . . ] Multiple color options: Adhesive visibility is tailored to production and design requirements, which helps produce high quality finished products. 3M Industrial Business Process 3MTM FastbondTM 2000-NF Contact Adhesive is sprayed onto both surfaces using a commercially available applicator at the commercial refrigeration equipment manufacturer. The EPS foam is then applied to the plywood inside the stainless steel shell. Use of this applicator replaced a previous method that required the operator to pour adhesive from 55 gallon drums into 5 gallon pressure pots. Now the applicator pulls adhesive right from the 55 gallon drum. Related Products 3MTM FastbondTM 30 Contact Adhesive Related Application Ideas Decorative and functional foam and fabric attachment. Qualified for Industry Specifications Production Part Approval Process (PPAP) level 3 certified. SIC Code 3585 ­ Commercial and Industrial Refrigeration Equipment Key Decision Makers Product Manager, Design Engineer, Manufacturing Engineer, Plant Manager For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. [. . . ] Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. Product Use Warranty and Limited Remedy Limitation of Liability Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106 3M and Fastbond are trademarks of 3M Printed in the USA Acfi2000. pdf © 3M 2004 [. . . ]