User manual 3M BONDING SWEEP TO HOLLOW METAL DOORS

[. . . ] Application Profile Market: Construction Application Description: Bonding sweep to hollow metal doors. 3MTM VHBTM Tape 5952 Key Application Requirements High initial and ultimate bond strength; easy to apply; temperature resistant (-40° to 200°F/-40° to 93°C); aesthetically pleasing (smooth look); ability to damp vibrations. PRODUCT 3MTM VHBTM Acrylic Foam Tape 5952 Product Replaced Mechanical screws had been previously used. This process was slow and inconsistent in drawing the plate to the bottom edge of the door. Benefits/Advantages To Customer Easy to use, quick to apply: 3MTM VHBTM Tape is applied to the cleaned surface of the sweep and pressurized. [. . . ] Versatile: VHB tapes offer a wide selection of adhesive systems that allow bonding the sweep to the bottom of the door either before or after the painting process. 3MTM VHBTM Tape 5952 bonds well to most painted metal and plastic without surface priming or abrading. The specially formulated synthetic adhesive bonds to most paints and powder coats. 3M Industrial Business Process 3MTM VHBTM Tapes are applied to the clean surface of the sweep. The liner is removed and the sweep is pressed into place on the bottom of the hollow metal door. A J-roller can be used to apply the appropriate pressure required to ensure good adhesive contact to the sweep. Surface Preparation IPA/Water should be used to clean all surfaces to be bonded. * Testing for adhesion levels is very important. *Note: Carefully read and follow solvent manufacturer's precautions and directions for use when using solvents. Related Application Ideas Bonding door seal plates to industrial doors. SIC Codes 34420000 ­ Hollow Metal Doors 34420401 ­ Fire Doors Key Decision Makers Engineering Manager Production Manager Plant Manager For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. [. . . ] If the 3MTM VHBTM Tape is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3MTM VHBTM TAPE. 3M shall not otherwise be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. Printed in USA Chmdsweep5952. pdf © 3M 2005 Important Notice Limited Warranty Limitation of Remedies and Liability Industrial Business Building 21-1W-10, 900 Bush Avenue St. [. . . ]