User manual 3M REPACK BEVERAGE CANS OR BOTTLES

[. . . ] Application Profile Market: Food and Beverage Application Description: Repack Beverage Cans or Bottles Key Application Requirements Fast, easy to use hand-held application system to simulate the orginal hot melt closure system from automatic hot melt in-line packaging equipment for carton starting, carton re-pack. PRODUCT 3MTM Scotch-WeldTM Hot Melt Adhesive 3762 LM, 3MTM Scotch-WeldTM Hot Melt Adhesive 3762 with 3MTM PolygunTM Applicators Product Replaced Competitive, low cost, trigger operated hot melt applicators and general purpose carton sealing hot melt adhesives in 12mm size. Benefits/Advantages To Customer User friendly: Low temperature (265ºF/129ºC) applied, hot melt adhesive that is safer to use than conventional hot melt adhesives. Strong, reliable bond: Excellent adhesion to most coated paper stock and corrugated substrates. [. . . ] The opposite flap is then hand pressed into place to securely hold the beverage cans inside the carton. This operation is done at the end of the automatic in-line packaging operation. It is also done at the local beverage distributor warehouse. Related Products 3M Tape Pad 1026 3MTM Combining Tape 8468 3MTM Combining Tape 8484 3MTM Concrete Repair DP 600 TM Advantages Resealing loose carton flaps before delivery of beverage at commercial business. Bundling of Carton Flaps During Packaging Process (For Fridge Packs) Bundling of Carton Flaps During Packaging Process (For Fridge Packs) Quick Setting Concrete Repair Caulk for Cracks in Warehouse Floors SIC Code 2082 ­ Malt Beverages 2084 ­ Wines, Brandy and Brandy Spirits 2086 ­ Bottled and Canned Soft Drinks and Carbonated Waters 5181 ­ Beer and Ale Wholesale Distributors 5182 ­ Wine and Distilled Alcoholic Beverage Distributors Key Decision Makers Quality Control Manager, Warehouse Manager Marketing Manager, Packaging Engineer For Additional Information To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. [. . . ] Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. Product Use Warranty and Limited Remedy Limitation of Liability Industrial Business Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55106 3M, Jet-melt and Polygun are trademarks of 3M Printed in the USA Element ID: 304968 FBrpjm3762. pdf © 3M 2004 [. . . ]