User manual 3M SAFETY-WALK COARSE TAPES AND TREADS 700

[. . . ] 3MTM Safety-WalkTM Coarse Tapes and Treads 710 Extra-large mineral particles and more durable construction provide additional slip resistance in the most extreme conditions · Extra-large abrasive particles provide additional slip and fall protection, even on wet or oily floors · The tough polymer construction, incorporating a more durable mineral, is designed to stand up longer under heavy traffic · An open abrasive pattern resists clogging and reduces clean up time The ultimate in slip-resistant surfacing earned its stripes in the military After much success within several branches of the military, this new slip-resistant surface is now helping to make the workplace safer. [. . . ] Custom die cutting and slitting are also available from authorized converters. 3Innovation 3MTM Safety-WalkTM Coarse Tapes and Treads 710 A more durable slip-resistant surface than General Purpose 610 Extra-large abrasive particles help resist clogging in muddy or oily conditions High quality abrasive particles to ensure long-lasting friction in any application Plastic film High performance adhesive Plastic film High performance adhesive 3MTM Safety-WalkTM Coarse Tapes and Treads 710 Applications: Decks, bus steps, railroad car tops, farm or construction equipment, fire escapes, loading docks, garage floors and airplane ramps Material: Coarse mineral-coated polymer surface backed by a high performance pressure-sensitive adhesive Colors: Black #710 Sizes: Please refer to price pages for individual part numbers Typical Properties Applied Thickness Applied Weight Minimum Application Temperature Maximum Service Temperature Average Measured Values: . 048 in. (1. 22 mm) 5. 51 oz. /ft2(1, 720 mg/cm2) 40°F (4°C) 175°F (79°C) 3MTM Safety-WalkTM General Purpose Tapes and Treads 610 Typical Properties Fire Retardancy, Smoke Density & Toxicity IMO A653 (16) & MSC 61-(67) NF F 16101 (trains) DIN 5510 (trains) BS 476 Part 6 (UK) BS 476 Part 7 (UK) Coefficient of Friction MIL-D-17951-E DIN 51130 (ZH1/571) Chemical Resistance Average Measured Values: Passes M2 F1 SF3 Class 0 Class 1 Exceeds specifications R13 Resists most chemicals 3MTM Safety-WalkTM Coarse Slip-Resistant Tapes and Treads: Conformance to military specification MIL-D-17951(E) SHIPS is only available via military orders or special product request (SPR). Easy to maintain Inspect the application periodically to maintain product effectiveness and ensure serviceability. Regularly scrub the treads with a stiff bristle brush to ensure they're kept free from dirt and other residue that might impair functionality. Wash with soap and water to keep material and surrounding surfaces dirt- and grease-free. How to reach us For more information or to place an order, call your local 3M distributor. Or, for the name of the 3M distributor nearest you, call: 1-800-852-9722 For custom sizes and shapes, call 3M Converter Markets at: 1-800-328-1681 To get technical data, application guidelines, maintenance, service life and warranty information about 3M traction products faxed directly to you, call Fax-On-Demand (3MTM Safety-WalkTM Slip-Resistant Tapes and Treads is document #8001; Custom Pressure-Sensitive Adhesives PC-1 and PC-2 for powder coatings is document #8002): 1-800-978-9654 To speak to a technical support person, call: 1-800-626-8578 For general assistance, call: 1-800-3M-HELPS 3M offers a complete line of slip-resistant products designed for the safety and comfort of people in the workplace. Limited Warranty: Except where prohibited by law, the following is made in lieu of all express or implied rights, warranties and conditions, statutory or otherwise. 3M warrants that its 3MTM Safety-WalkTM Slip-Resistant Tapes and Treads will be free from defects in material and manufacture at time of purchase. There are many factors that can affect the use and performance of this product; i. e. , the type and preparation of the surface, the conditions of use or exposure, etc. Due to the variety of factors that can affect the use and performance of this product, most of which are uniquely within the user's knowledge and control, it is essential that the user (a) determines whether or not this product is fit for the desired purpose, (b) suitable for user's method of application, (c) adequately maintained and (d) is replaced at end of useful life. [. . . ] © 3M 2002 Minimum 10% Post-Consumer Fiber 70-0710-3884-1 [. . . ]