User manual 3R SYSTEM CASE R800

[. . . ] For your safety, avoid distractions from music or phone calls while in traffic or other potentially dangerous environments. • • General information To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Apparatus shall not be exposed to dripping or splashing. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. [. . . ] • If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product. • • • 4 EN About operating and storage temperatures • Do not operate or store in a place where temperature is below -15ºC (5ºF) or above 55ºC (131ºF) as this may shorten your battery life. • The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like. Warning •• Make sure the headset is disconnected from the USB charging cable before removing the battery. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headset. 1 2 3 4 When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Notice for the European Union Hereby, Philips Consumer Lifestyle, BG Accessories, declares that this Philips Bluetooth stereo headset SHB9100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Battery disposal Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Trademarks Trademarks are the property of Koninklijke Philips Electronics N. V. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N. V. is under license. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. EN 5 English Remove the integrated battery 2 Your bluetooth stereo headset Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. • Audio cable e a b d c Introduction With this Philips Bluetooth stereo headset, you can: • • • • Enjoy convenient wireless hands-free call Enjoy and control wireless music Switch between calls and music Enjoy music on non-Bluetooth devices with audio cable • Quick start guide What else you’ll need A mobile phone that is capable of Bluetooth stereo streaming is compatible with the Bluetooth A2DP profile. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip •• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone. Play or pause music. (This function is available if your mobile phone supports this feature. ) Adjust volume. Activate voice dialing 1 short beep 1 short beep 1 short beep 1 short beep 1 long beep 1 long beep Press Press and hold Press twice Press twice Press and hold for more than 4 seconds Automatic power saving If the headset fails to connect any Bluetooth device within range in five minutes, it powers down automatically to save the battery life. Slide up/ down VOL +/Press Press twice Press 1 short beep 1 short beep 1 short beep 1 short beep / 2 short beeps 2 short beeps before dial tone Use your headset Task Turn the headset on. Operation Sound or LED Indicator Press and 1 short beep hold for - 3 white more than 4 flashes: Battery seconds low < 25% - 2 white flashes: Battery level < 50% - 1 blue flash: Battery level > 50% Press twice Other status and indicators EN 9 English 4 Use the headset Turn the headset off. Press and hold for more than 4 seconds Press - 1 long beep - 1 long white flash Headset Status The headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music. The headset is on but not connected to a Bluetooth device. Battery is fully charged. Indicator Blue LED flashes every 8 seconds. White LED is off. Use with the audio cable With the supplied audio cable, you can use the headset with non-Bluetooth enabled devices or use the headset on airplane. No battery power is required when you use the headset with the audio cable. Caution •• Finish your call before connecting the audio cable, as this will switch off battery power and end an incoming call. Connect the supplied audio cable to • • the headset and; an external audio device. Wear your headset Adjust the headband for the best fit. Tip •• After use, twist both earshells, fold the headset flat for storage. 10 EN • • • • • • Up to 9 hours of play time or talk time Up to 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (230 mAh) 3. 5 mm audio socket for corded headset mode Bluetooth 2. 1+EDR, Bluetooth mono support (Headset Profile - HSP, HandsFree Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Operating range: Up to 15 meters (50 feet) Adjustable, flat-folding headband Noise isolating slow recovery foam Digital echo & noise reduction Auto power off Battery status check • • • • • • EN 11 English 5 Technical data 6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. The audio cable is connected to the headset. • Disconnect the audio cable. Pairings may have been reset or headset has been previously paired with other device. • Pair the headset with the mobile phone again as described in the user manual. Voice dialing or redialing does not work. Your mobile phone may not support this feature. The other side cannot hear me. The microphone is muted. [. . . ] • Disconnect the audio cable. Pairings may have been reset or headset has been previously paired with other device. • Pair the headset with the mobile phone again as described in the user manual. Voice dialing or redialing does not work. Your mobile phone may not support this feature. The other side cannot hear me. The microphone is muted. • Press to enable the microphone. Fail to pair with a mobile phone. Bluetooth disabled. • Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. The headset is not in pairing mode. [. . . ]