User manual 3R SYSTEM R900

[. . . ] • When positioning the display, make sure the power plug and outlet are easily accessible. • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. [. . . ] Smart picture Select a smart picture mode from: • Highbright: for moving images such as Video • Standard: for images (factory setting) • sRGB: for text based images • Cinema: for movies. • User: create your own picture settings. This mode is automatically selected after you change the settings in the Picture menu. Use the UP/DOWN button to make selection. Video source Select a video input source. Use the UP/DOWN button to toggle between • DVI-D • HDMI • VGA • Component • S-Video • Video Picture reset Reset all settings in the Picture menu. Use the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu. RETURN TO THE CONTENTS User Manual R900 4. 2. 2. SCREEN MENU H position Note: For VGA input only. Adjust the horizontal placement of the picture. • Zoom - Expands the horizontal and vertical sizes of the image simultaneously. • H zoom - Expands the horizontal size of the image only. • V zoom - Expands the vertical size of the image only. • H position - Moves the horizontal position of the image left or right. • V position - Moves the vertical position of the image up or down. Screen reset Reset all settings in the Screen menu. Use the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu. RETURN TO THE CONTENTS User Manual R900 4. 2. 3. AUDIO MENU Speaker Set the display to play audio using the built-in (internal) speaker, external speakers or external audio devices (if connected). Use the UP/DOWN button to toggle between • Internal • External • Line-out Volume Adjust to increase or decrease the audio output level. Use the UP/DOWN button to make selection. Audio source To select the audio input source according to the source connected to the audio input and HDMI sockets on the display. Audio 3 HDMI Audio 1 Audio 2 Use the UP/DOWN button to toggle between • Audio 1 • Audio 2 • Audio 3 • HDMI Audio reset Reset all settings in the Audio menu. Use the PLUS/MINUS button to make selection. [. . . ] If water or moisture gets inside the unit, operating problems, or electrical and shock hazards may result. • Do not scratch or hit the cabinet with fingers or hard objects of any kind. • Do not use volatile substances such as sprays, solvents and thinners on the cabinet. • Do not place anything made from rubber or PVC near the cabinet for any extended periods of time. RETURN TO THE CONTENTS User Manual R900 7. 2. [. . . ]