User manual ABIT FATAL1TY-AN9-32X

[. . . ] Introduction Hardware Setup Motherboard AMD Socket AM2 User's Manual BIOS Setup AMD Socket AM2 ATX Motherboard NB: NVIDIA C51XE SB: NVIDIA MCP55PXE Driver & Utility CD 2GHz HT Dual DDR2 800 DIMM Slots NVIDIA SLI Technology Dual PCI-E X16 Slots Dual GbE LAN IEEE 1394a 6x SATA 3Gb/s with RAID 0/1/0+1/5/JBOD For more information: Appendix www. abit. com. tw Fatal1ty GuruTM Technology ABIT OTES GTTM Technology 7. 1 Channel HD Audio User's Manual English, 2nd Edition July, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] Beep Enable Use <Space> key to enable warning beeps function. If the voltage of corresponding element is higher/lower than the high/low limit, warning beeps will sound. High/Low Limit These items set the high and low voltage limit. The value of high limit must be set above the one of low limit. 3-6 Fan Speed Monitoring Click <Enter> key to enter its submenu: µGuru Utility V1. 00C ABIT EQ Fan Speed Monitoring Reading Shutdown Enable 7440 RPM (*) N/A () N/A () N/A () N/A () N/A () (*)CPU FAN Speed ( )SYS FAN Speed ( )AUX1 FAN Speed ( )AUX2 FAN Speed ( )AUX3 FAN Speed ( )AUX4 FAN Speed Beep Enable (*) () () () () () Low Limit 300 RPM 300 RPM 300 RPM 300 RPM 300 RPM 300 RPM :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit CPU/SYS/AUX1~4 FAN Speed These items display the speed of the fans connected to CPU, SYS, and AUX1~4 FAN headers. Shutdown Enable BIOS Setup Use <Space> key to enable system shutdown function. Once the system has detected that the fan speed is lower than the low limit value, system will shutdown automatically. Beep Enable Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit value, warning beeps will sound. Low Limit These items set the low limit of fan speed. 3-7 FanEQ Control µGuru ABIT EQ FanEQ Control CPU FanEQ Control SYS FanEQ Control AUX1 FanEQ Control AUX2 FanEQ Control AUX3 FanEQ Control AUX4 FanEQ Control Utility V1. 00C Press Press Press Press Press Press Enter Enter Enter Enter Enter Enter Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit Click <Enter> key to enter its submenu (CPU FanEQ Control): µGuru Utility V1. 00C ABIT EQ CPU FanEQ Control CPU FanEQ Control Enabled -Reference Temperature CPU Temperature -Control Temperature High 65°C/149°F -Control Temperature Low 35°C/95°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit CPU FanEQ Control When set to [Enabled], these items control the CPU fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature, but there is only one "CPU Temperature" item to choose for the "CPU FanEQ Control". 3-8 - Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. Click <ESC> key to exit this menu and move back to the main menu of "ABIT EQ". Move the down-arrow key to the next item (SYS FanEQ Control), and then click <Enter> key to enter its submenu: µGuru Utility V1. 00C ABIT EQ SYS FanEQ Control SYS FanEQ Control Enabled -Reference Temperature System Temperature -Control Temperature High 40°C/104°F -Control Temperature Low 30°C/86°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help BIOS Setup :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit SYS FanEQ Control When set to [Enabled], these items control the SYS fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature. Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. 3-9 Click <ESC> key to exit this menu and move back to the main menu of "ABIT EQ". Move the down-arrow key to the next item (AUX1 FanEQ Control ~ AUX4 FanEQ Control), and then click <Enter> key to enter its submenu: µGuru Utility V1. 00C ABIT EQ AUX1 FanEQ Control AUX1 FanEQ Control Enabled -Reference Temperature System Temperature -Control Temperature High 40°C/104°F -Control Temperature Low 30°C/86°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit AUX1 FanEQ Control ~ AUX4 FanEQ Control When set to [Enabled], these items control the AUX1~4 fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature. Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. 3-10 3. 2 Standard CMOS Features Phoenix ­ Award BIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Mon. [. . . ] Example: 512M* 4PCS Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2. 5-3-3-7 @533MHz Graphics information: Note Graphics card's brand, model and driver version Graphics card: Type in the brand and model name of your graphics card. Example: ATI RADEON X850 XT PE Graphics driver version: Type in the driver version of your graphics card Example: Catalyst 5. 12V Power supply maker: Type in the brand and model name of your power supply unit. Power supply wattage: Type in the power wattage of your power supply unit. [. . . ]