User manual ABIT KV7 REV 1

[. . . ] The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] [Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system. Run VGABIOS if S3 Resume: Three options are available: Auto Yes No. This item can let you choose when S3 resume active, the VGA BIOS need to be initiative or not. Restore On AC Power Loss: This item selects the system action after an AC power failure. [Power Off]: When power returns after an AC power failure, the system's power remains off. you must press the Power button to power-on the system. [Power On]: When power returns after an AC power failure, the system's power will be powered on automatically. [Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurs. If the system's power is off when AC power failure occurs, it will remain off when power returns. If the system's power is on when AC power failure occurs, the system will power-on when power returns. IRQ/Event Activity Detect: Click <Enter> key to enter its submenu: Power On Function: Four options are available: Hot Key Password Mouse Button Only. This iten allow you to choose the computer power turn on method you like. Some item you choose, some of the following items will be available to let you making further setting. For instance, when you set this item to Password, the item of "KB Power On Password" will allow you to enter password. When you set this item to Hot Key, the item of "Hot Key Power On" will allow you to choose the hot key you want. If you choose Mouse, you can press any key on mouse to turn on the computer power. NOTE: To enable this "Power On" function, the wake-up header of [PS2-PWR1], [USB-PWR1], [USB-PWR2] must be set to [Enabled] position. please refer to the configuration of "Wake-up Header" [PS2-PWR1] , [USB-PWR1] , and [USB-PWR2] in section 2-4 , chapter 2. The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or USB type. Some PS/2 mice cannot wake up the system because of compatible problems. If the specs of your keyboard are too old, it may fail to power on. KB Power On Password: When you perss the <Enter> key, then you can enter the password you want. [. . . ] After all, your reseller regards you as an important customer who may purchase more products and who can urge your friends to buy from him or her as well. They integrated and sold the system to you. They should know best what your system configuration is and your problem. They should have reasonable return or refund policies. [. . . ]