User manual ABIT KV8

[. . . ] KV8/KV8-MAX3 AMD AthlonTM 64 System Board Socket 754 User's Manual 4200-0410-01 Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] [AGP]: When the system boots, it will first initialize AGP. Onboard FDD Controller: Two options are available: Enabled and Disabled. You can enable or disable the onboard FDD controller. KV8/KV8-MAX3 BIOS Setup 3-17 3-6. Power Management Setup Cool'n'Quiet Technology: This option enables or disables the AMD K8 cool and quiet function. ACPI Suspend Type: This item selects the type of Suspend mode. [S1(PowerOn-Suspend)]: Enables the Power On Suspend function. [S3(Suspend-To-RAM)]: Enables the Suspend to RAM function. Resume by OnChip USB: Two options are available: Disabled or Enabled. When set to Enabled, any event affecting from onchip USB will awaken a system that has powered down. This item can be configured only if the item "ACPI Suspend Type" is set to [S3(STR)]. Run VGABIOS if S3 Resume: Three options are available: Auto Yes No. This item can let you choose when S3 resume active, the VGA BIOS need to be initiative or not. Power Button Function: This item selects the method of powering off your system: [Delay 4 Sec. ]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button. [Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system. CPU THRM-Throttling: This item controls the CPU speed by cutting down its regular power to a percentage during the STR (Suspend To RAM) state. Wakeup by PME# of PCI: Two options are available: Disabled or Enabled. When set to Enabled, any event affecting from PCI card (PME) will awaken a system that has powered down. User's Manual 3-18 Chapter 3 Wakeup by Alarm: Two options are available: Disabled or Enabled. When set to Enabled, you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. Date (of Month) Alarm / Resume Time (hh:mm:ss): You can set the Date (month) Alarm and Time Alarm (hh:mm:ss). Any event occurring will awaken a system that has powered down. [. . . ] However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. Be sure to use very, simple, concise language that clearly states the problem, avoid rambling or flowery language and always list your system components. Here is the contact information for our branch offices: KV8/KV8-MAX3 How to Get Technical Support J-3 North America and South America: ABIT Computer (U. S. A. ) Corporation 45531 Northport Loop West, Fremont, California 94538, U. S. A. [. . . ]