User manual ABIT NI8 SLI GR FEATURES SPECIFICATIONS

[. . . ] NI8 SLI Series Intel Pentium 4 System Board Socket 775 User's Manual 4200-0460-05 Rev. 1. 02 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show: This item determines to show the full screen logo when booting. User's Manual 3-18 Chapter 3 3-4. Advanced Chipset Features Phoenix ­ AwardBIOS CMOS Setup Utility Advanced Chipset Features Memory Timings Optimal Current CAS-RCD-RP-RAS-RC 4-4-4-11-15(1T) Target CAS-RCD-RP-RAS-RC 4-4-4-11-15(1T) T(LAS) Auto T(RCD) Auto T(RP) Auto T(RAS) Auto T(RC) Auto Addressing Mode Auto SLI Broadcast Aperture LDT Frequency Auto 4X Item Help X X X X X X :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Memory Timings Two options are available: Optimal $ Expert. Choose Optimal for better memory compatibility; choose Expert for user-define. SLI Broadcast Aperture This item allows you to control the SLI Broadcast Aperture function. LDT Frequency Six options are available: 1X$ 2X $ 3X$ 4X $ 5X$ 3. 5X. The default setting is 4X. NI8 SLI Series BIOS Setup 3-19 3-5. Integrated Peripherals Phoenix ­ AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device Press Enter OnChip PCI Device Press Enter OnBoard PCI Device Press Enter Onboard FDC Controller Enabled Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults # OnChip IDE Device: Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility Onchip IDE Device RAID Config Press Enter OnChip IDE-1 Controller Enabled OnChip IDE-2 Controller Enabled IDE Bus Master Enabled Serial-ATA 1/2 Enabled Serial-ATA 3/4 Enabled Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults User's Manual 3-20 Chapter 3 # RAID Config: Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility RAID Config - RAID Enable Enabled X - IDE1 Master RAID Disabled X - IDE1 Slave RAID Disabled X - IDE2 Master RAID Disabled X - IDE2 Slave RAID Disabled X - Serial-ATA 1 RAID Disabled X - Serial-ATA 2 RAID Disabled X - Serial-ATA 3 RAID Disabled X - Serial-ATA 4 RAID Disabled Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults RAID Enable: This item allows you to enable or disable the IDE RAID function. IDE1/2 Master/Slave RAID, Serial-ATA 1/2 RAID: Select the disks that you want to use as RAID disks. OnChip IDE-1 Controller: This item selects whether to enable or disable the IDE-1 controller. OnChip IDE-2 Controller: This item selects whether to enable or disable the IDE-2 controller. IDE Bus Master: This option enables or disables the IDE bus mastering capability under the DOS environment. Serial-ATA 1/2 Select the disks that you want to use as RAID disks. Serial-ATA 3/4 Select the disks that you want to use as RAID disks. NI8 SLI Series BIOS Setup 3-21 # OnChip PCI Device: Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility OnChip PCI Device OnChip USB V1. 1+V2. 0 - USB Keyboard Support Via OS OnChip Audio Controller Auto OnChip Lan Controller Auto LAN Boot ROM Enabled Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults OnChip USB: This option enables or disables the USB controller. USB Keyboard Support Via: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. OnChip Audio Controller: This item allows you to control the audio controller. OnChip Lan Controller: This item allows you to control the Lan controller. LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. User's Manual 3-22 Chapter 3 # OnBoard PCI Device: (For model NI8 SLI only) Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility OnBoard PCI Device OnBoard SATA Controller Enabled - SATA Mode IDE Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults OnBoard SATA Controller: This option enables or disables the SATA controller. SATA Mode This item determines the mode for SATA. [IDE]: The onboard SATA served as IDE Mode. [RAID]: The onboard SATA served as RAID Mode. # Back to Integrated Peripherals Setup Menu: Onboard FDC Controller: Two options are available: Enabled and Disabled. You can enable or disable the onboard FDC controller. [. . . ] They will be more familiar with local conditions and will have better insight as to which resellers offer what products and services. Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. Please understand that we are selling through distribution channels and while we don't have the resources to serve every end-user, we will do our best to help every customer. Please also remember that for many of our technical support team English is a second language. [. . . ]