User manual ABIT RADEON

[. . . ] (R9800XT, R9600XT-VIO, R9600, R9600SE) ABIT RADEON Series 3D Graphics Card User's Manual 4200-0401-03 Rev. 1. 10 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] Video content is displayed on your Secondary display(s) is always in full screen mode. NOTE: Your computer must be set for 16-bit color depth or higher to use this mode. Same on all: Video content is displayed on your Primary and Secondary display is exactly the same manner. For example, all displays will show video output in full screen mode. Theater Mode Settings: These settings are available when Theater Mode is selected. Same as source video: The aspect ratio of the source video is maintained for full screen display. NOTE: This option may result in black bars on either the horizontal or vertical sides of the video display. Full Screen Video: The source video is scaled so that your display is showing full screen. NOTE: If the source video contains horizontal black bars, as do some DVD movies, the full screen video will also contain black bars. 4:3 [Standard TV]: Select this option if the aspect ratio of the display device showing full screen video has the standard 4:3 aspect ratio (standard TVs and monitors). 16:9 [Widescreen]: Select this option if the aspect ratio of the display device is showing full screen video has a 16:9 aspect ratio (widescreen HDTVs). User's Manual 4-12 Chapter 4 4-11. 3D Control Panel Using this control panel, you can fine-tune the settings for Direct3D and OpenGL applications. 3D Settings For: Click the check box to specify which 3D application settings you want to adjust. Main slider: Allows you to select the kind of application experience you'd like to have. Moving the slider to the left will maximize application performance, while moving the slider to the right will optimize 3D image quality. Use custom settings: When this box is checked, the Main slider is disabled, allowing you to move each individual slider in the Custom Settings section below. Setting the individual sliders gives you finer control over your application experience. Using Custom Settings is recommended for advanced users only. Custom: When Use custom settings is checked, the Custom option will be available to select. You may click this button to enter the Direct3D or OpenGL custom settings control panel. Profiles for: Allows users to save their current 3D configuration into a profile. Loaded profiles will be displayed under the current settings tab. [. . . ] Unit 3, 24-26 Boulton Road, Stevenage, Herts SG1 4QX, U. K. Tel: 44-1438-228888 Fax: 44-1438-226333 sales@abitcomputer. co. uk technical@abitcomputer. co. uk Germany, Benelux (Belgium, Netherlands, Luxembourg), Denmark, Norway, Sweden, Finland, and Switzerland: AMOR Computer B. V. (ABIT's European Office) Van Coehoornstraat 7, 5916 PH Venlo, The Netherlands Tel: 31-77-3204428 Fax: 31-77-3204420 sales@abit. nl technical@abit. nl http://www. abit. nl Austria, Czech, Romania, Bulgaria, Yugoslavia, Slovakia, Slovenia, Croatia, Bosnia, Serbia, and Macedonia: Asguard Computer Ges. m. b. H Schmalbachstrasse 5, A-2201 Gerasdorf/Wien, Austria Tel: 43-1-7346709 Fax: 43-1-7346713 asguard@asguard. at User's Manual D-4 Appendix D Japan: ABIT Computer (Japan) Co. Fax: 81-3-5396-5110 http://www. abit4u. jp Shanghai: ABIT Computer (Shanghai) Co. [. . . ]