Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ABIT SI-1N. We hope that this ABIT SI-1N user guide will be useful to you.
Lastmanuals help download the user guide ABIT SI-1N.
Detailed instructions for use are in the User's Guide.
[. . . ] SI-1N
Brief Installation Guide
(A complete user's manual is also available via browsing the Driver & Utilities CD. )
Features & Specifications
CPU Supports single Pentium 4 processor, 478-pin, up to 2. 8GHz (based on 400MHz FSB) Chipset Intel 845GL chipset Memory Controller Hub (MCH) Supports PCI 2. 2, Ultra ATA/100 IDE protocol (ICH4) Memory Two 184-pin DIMM sockets support PC1600 / PC2100 un-buffered low profile memory Up to 2GB, none ECC memory capacity LAN Broadcom BCM5702 Controller Dual Gigabit Ethernet LAN ports Support Fail Over, Load Sharing, Load Balancing and TCP/UDP checksum off-loading capabilities Graphics Enabling integrated Graphic Support Featured by 845GL PCI Extension Slot 1 PCI 32bit/33MHz extension slot Storage 1 Channel Ultra ATA/100/66/33 IDE Connector (by ICH4) 4 Channel ATA/133 RAID (0, 1, 0+1, by HighPoint HPT374) System BIOS Phoenix/Award Plug and Play BIOS 4M-bit Flash ROM Internal I/O Headers 1 USB port pin-header 1 VGA pin-header COM1 and COM2 pin-headers 1 Parallel Port pin header
External I/O Connectors 1 VGA connector 2 USB connectors 2 RJ-45 LAN connectors Miscellaneous Support DOM (Disk On Module) Hardware monitoring, ACPI, WOL Micro ATX form factor (10. 6" x 9. 6")
Note: All brand names and trademarks are the property of their respective owners.
Connectors, Headers, and Jumper
Note: Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. [. . . ] J4: Connects to Local Area Network.
CCMOS1 Jumper: This header uses a jumper to clear the CMOS memory. Short pin 2 and pin 3 only when you want to clear the CMOS memory. The default setting is pin 1 and pin 2 shorted for normal operation. COM1/COM2 Header:
IDE0 Connector: Connects to IDE hard disk, CD-ROM, DOM (Disk On Module) or Zip drive. IDE1 ~ IDE4 Connectors (RAID):
JP1: Reboot Switch
Open (default): Automatically reboot the system when it fails to boot up. Close: Disable the automatically reboot function. KB1: Keyboard Header This header is preserved for connecting PS/2 keyboard. These four ports are controlled by HighPoint HPT374 chipset that supports regular Ultra ATA/133 devices ports or a RAID array in the combination of RAID 0, RAID 1, or RAID 0+1 mode. [. . . ] FPIO1 Header: These headers connect to the switch and indicators at font panel.
Pin 1-2 3-4 5-6 7-8 9-10 11-12 13-14 15-16 17-20 Description Power On Reset No Connection Power LED HDD LED No Connection LAN1-LED LAN2-LED No Connection
VGA2 Connector: This connector provides additional VGA output.
an
Pin 1 3 5 7 9
Pin Assignment VCC Data 0 Data 0 + Ground NC
Pin 2 4 6 8 10
Pin Assignment VCC Data 1 Data 1 + Ground NC
BIOS Setup
When you power the computer on, you will see the following message appear briefly at the bottom of the screen during POST: PRESS DEL TO ENTER SETUP If you want to configure the BIOS, you can press the <Delete> key immediately to enter the BIOS Setup Menu.
Note: Don't change the parameters inside the BIOS Setup Menu unless you are thoroughly aware of the BIOS settings.
J10: 5V Header This header provides the 5V power for DOM (Disk On Module). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ABIT SI-1N
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ABIT SI-1N will begin.
