User manual ABIT SI-1NS40

[. . . ] SI-1Ns40/ SI-1Ns42/SI-1Ns60 Intel Pentium 4 Server Board Socket 478 User's Manual Rev. 2. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] USB Keyboard Support: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. User's Manual 3-12 USB Mouse Support: Chapter 3 This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. En/Decryption Controller: This option enables or disables the onboard Encryption/Decryption Controller. Onboard LAN1 Controller: This option enables or disables the LAN1 controller. Onboard LAN2 Controller: This option enables or disables the LAN2 controller. Onboard LAN3 Controller: This option enables or disables the LAN3 controller. Onboard LAN4 Controller: This option enables or disables the LAN4 controller. Onboard LAN5 Controller: (For SI-1Ns42, SI-1Ns60 only) This option enables or disables the LAN5 controller. Onboard LAN6 Controller: (For SI-1Ns42, SI-1Ns60 only) This option enables or disables the LAN6 controller. SI-1Ns40/SI-1Ns42/SI-1Ns60 BIOS Setup 3-13 SuperIO Device: Click <Enter> key to enter its submenu: Onboard Serial Port 1: This item determines which I/O addresses the onboard Serial Port 1 controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port 1. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port 1. [Disabled]: Disables the onboard Serial Port 1. Onboard Serial Port 2: This item determines which I/O addresses the onboard Serial Port 2 controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port 2. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port 2. [Disabled]: Disables the onboard Serial Port 2. Onboard Parallel Port: This item specifies the I/O address used by the parallel port. User's Manual 3-14 Chapter 3 [Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable. [378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting. [278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address. [3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address. [. . . ] Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. [. . . ]