User manual ABIT SU-2S

[. . . ] SU-2S Dual Opteron Server Board Socket 940 User's Manual Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] Leave this item to its default [Auto] setting, or if you want to configure its following options manually by selecting [Manual] setting. M1563 Configuration This item configures the power saving, clock gated and prefetch for M1563 south-bridge chipset. Click <Enter> key to enter its submenu: User's Manual 3-10 Chapter 3 HyperTransport Config This item configures width and frequency for HyperTransport. Click <Enter> key to enter its submenu: CPU1/CPU2 LDT Bus Width This item specifies CPU1 to CPU2 Hyper Transport Link Data width. This item specifies CPU1 to CPU2 Hyper Transport Link Clock frequency. CPU1/PCI-X Bridge Width This item specifies CPU1 to PCI-X Hyper Transport Link Data width. This item specifies CPU1 to PCI-X Hyper Transport Link Clock frequency. PCI-X/South Bridge Width This item specifies PCI-X to South Bridge Hyper Transport Link Data width. This item specifies PCI-X to South Bridge Hyper Transport Link Clock frequency. SU-2S BIOS Setup 3-11 Back to Advanced Chipset Features Menu: Watch Dog Function This option controls the function for Watch Dog. [Disabled]: Disable the Watch Dog function. [Enabled/Sec. ]: Enable the Watch Dog function by the timer based on seconds. [Enabled/Min. ]: Enable the Watch Dog function by the timer based on minutes. Watch Dog Time-Out Value Type in the Time-Out value for your Watch Dog function. 3. 2. 3. Integrated Peripherals IDE Bus Master: This option enables or disables the IDE bus mastering capability under the DOS environment. Onboard IDE-1 Controller This item enables or disables the onboard IDE-1 controller. Onboard IDE-2 Controller This item enables or disables the onboard IDE-2 controller. User's Manual 3-12 Chapter 3 Onboard PCI Device: Click <Enter> key to enter its submenu: Onboard SATA Controller: This option enables or disables the onboard SATA controller. SATA ROM This item allows you to use the SATA ROM device. Onboard LAN1 Controller: This option enables or disables the LAN1 controller. LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. Onboard LAN2 Controller: This option enables or disables the LAN2 controller. LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. SU-2S BIOS Setup 3-13 Onboard SO-DIMM slot This option enables or disables the onboard SO-DIMM slot controller. Option ROM This item allows you to use the ROM device. PCI-X SLOT1 This option enables or disables the PCI-X slot1 controller. [. . . ] Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. Be sure to use very, simple, concise language that clearly states the problem, avoid rambling or flowery language and always list your system components. [. . . ]