User manual ABIT SV-1A

[. . . ] SV-1A AMD Athlon 64 Server Board Socket 939 User's Manual Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] [Enabled/Min. ]: Enable the Watch Dog function by the timer based on minutes. Watch Dog Time-Out Value Type in the Time-Out value for your Watch Dog function. SV-1A BIOS Setup 3-11 3. 4. Integrated Peripherals OnChip IDE Device: Click <Enter> key to enter its submenu: User's Manual 3-12 SATA RAID ROM: Select this item to enable/disable the SATA RAID BIOS during POST. IDE Bus Master: Chapter 3 This option enables or disables the IDE bus mastering capability under the DOS environment. Onboard IDE-1 Controller: This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if you want to add a different hard drive controller. Onboard IDE-2 Controller: The description is same as the OnChip IDE-1 Controller. Onboard PCI Device: Click <Enter> key to enter its submenu: Booting OS Selection: This item selects the booting OS. Primary PCI-X Bus Mode: This item selects the bus mode for primary PCI-X slot. SV-1A BIOS Setup Onboard SATA Controller: This item enables or disables the Serial ATA controller. SATA ROM: This item enables or disables the boot ROM of the Serial ATA devices. PCI-X SLOTA1: This option enables or disables PCIXA1 slot. Option ROM: This item enables or disables the boot ROM of the device added at PCIXA1 slot. Secondary PCI-X Bus Mode: This item selects the bus mode for secondary PCI-X slot. Onboard LAN Controller: This option enables or disables the LAN controller. LAN Boot ROM: 3-13 This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. PCI-X SLOTB1: This option enables or disables PCIXB1 slot. Option ROM: This item enables or disables the boot ROM of the device added at PCIXB1 slot. PCI-X SLOTB2: This option enables or disables PCIXB2 slot. Option ROM: This item enables or disables the boot ROM of the device added at PCIXB2 slot. User's Manual 3-14 Chapter 3 SuperIO Device: Click <Enter> key to enter its submenu: Onboard FDD Controller: This option enables or disables the onboard FDC controller. Onboard Serial Port 1 / Onboard Serial Port 2: This item determines which I/O addresses the onboard Serial Port controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port. [Disabled]: Disables the onboard Serial Port. [. . . ] Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. Be sure to use very, simple, concise language that clearly states the problem, avoid rambling or flowery language and always list your system components. [. . . ]