User manual ABIT SX7-533

[. . . ] Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] If you use the older AGP adapter that does not support AGP 4X mode, you need to set this item to 2X. You can check your AGP adapter user's manual to know what kind of AGP mode it can support. AGP Fast Write: Two options are available: Enable or Disable. If your AGP adapter can support this function, then you can choose Enable. Enabling this item can improve your system performance, but it may also decrease system compatibility. User's Manual 3-16 Chapter 3 AGP Aperture Size: Up to seven options are available: 4MB ) 8MB ) 16MB ) 32MB ) 64MB ) 128 MB ) 256 MB. This option specifies the amount of system memory that can be used by the AGP device. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation. See http://www. agpforum. org for AGP information. APIC Select: Two options are available: Disable or Enable. If you set to Enable, the next item will be available to choose. When you set it to Disable, the system will use the default six PCI IRQs for all devices, and will not increase the number of PCI IRQs. MPS Revision: This option specifies which version of MPS the motherboard will use. Two options available: 1. 1 or 1. 4, The default setting is 1. 4. MPS stands for Multi-Processor Specification. If you use an older operating system for dual processor executing, please set this option to 1. 1. IDE Access Interface: Two options are available: Fast Embedded Bus or PCI Bus. The default setting is Fast Embedded Bus. This item can let you select to use the legacy PCI IDE access interface, or use the SiS MuTIOL® Media I/O bus to transfer data. Select the Fast Embedded Bus should can get the better system performance. USB0 Access Interface: Two options are available: Fast Embedded Bus or PCI Bus. The default setting is Fast Embedded Bus. [. . . ] If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. [. . . ]