User manual ACER AF707

[. . . ] Table of Contents IMPORTANT SAFEGUARDS 1 . 1 1. 2 Precautions -when using this monitor. . . 1 1. 4 How to install/remove the swivel base . . . Front control location and functions . . . [. . . ] Keep the monitor away from high capacity transformer, electric motor and other strong magnetic field. The monitor should not be used in damp, dusty or dirty area. 1. 3 Pedestal (Fig. 1) The pedestal enables you to place the monitor into a convenient position with best viewing comfort by tilting and/or turning the monitor. 1. 4 How to install/remove the swivel base (Fig. 2) To attach the swivel base to the monitor, do the following 1. Carefully turn the monitor on this side or upside-down. Locate the cavities at the bottom of the monitor. Insert the pegs "3a" on the swivel base into these cavities. Push firmly toward the front (CRT direction) of the main unit until the latch "3b" at the bottom of the monitor clicks shut. To remove the swivel base, use your thumb to push "3b" to disconnect the latch properly, push down firmly and pull the base against the main unit. The base removes from the attached position. Fig. 2 Page 1 2 Front control locations and functions 2. 1 Operation (1) Power ON/OFF Switch ( ): This button is used to turn the monitor on and off. (2) Power indicator: This indicator lights up green when the monitor operates normally. If the monitor is in Energy saving mode, this indicator color changes to flash. (3)To adjust visual settings ( "¡¿", "¡¶", "MENU", "EXIT" ): Please following the procedure of selection and adjusting an item using the OSD system as below steps for main functions adjustment. Step 1: Press and release MENU control key to activate the OSD menu. Step 2: Press ¡¶ or ¡¿ key to highlight the desired option of OSD icon. Step 3: Press and release MENU key to access the option. The color of the inner area of the OSD will changed from blue to green. Step 4: To make your adjustments, press ¡¶ key to increase or ¡¿ key to decrease the setting. Step 5: Press and release MENU key to store the changed, the color of the inner area will go back to blue. You can select other function to make adjustments by ¡¶ and ¡¿ key. Also you can select EXIT icon or press EXIT key to exit the OSD menu. 2. 2 Adjust and Programming CONTRAST: Adjusts the image brightness in relation to the background. BRIGHTNESS: Adjusts the overall image and background screen brightness. [. . . ] (Turning off the OSD windows) DEGAUSS: Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colors focus and convergence. When pressed, your image will jump and waver a bit as the screen is demagnetized. Page 2 Page 3 2. 3 Self test pattern The monitor may display a three colors test pattern. This is to indicate that the monitor is functioning properly, but the computer' video signal is not reaching s the monitor. In this case, please make sure the video cable is properly connected. [. . . ]