User manual ACER AL1516W

[. . . ] 6 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Safety Rules Electrical Safety Note: To ensure your safety and prolong the life of the product, read the following safety rules carefully when you use the product for the first time. Only authorized and qualified technicians are allowed to open the LCD display case. [. . . ] Make sure that your hands are dry without moisture. Don't expose your LCD display in the rain, water, or the environment with high temperature or humidity, such as kitchens, surroundings of a swimming pool, any place near flower vases, etc. ) If your LCD display operates abnormally, especially if there is smoke, noise or smell, remove the plug immediately and contact our authorized dealer or service center. Installation Safety Don't touch your LCD display with your fingers or any hard objects to avoid scratching or leaving any oil sludge on the surface of the display Install your LCD display at the place where the risk of dust contamination is low. Take moisture-proof and ventilation measures to protect your LCD display. Don't install your LCD display near any heat source, such as kitchen tables, ovens, or fire sources, or in the sun. Install your LCD at the place where children will not touch it to avoid electric shock, or dropping. Secure your LCD firmly or explain the safety rules to children, if required. When installing your LCD display or adjusting its angle, attention shall be paid to the loading capability and leveling of the display. Cleaning Safety Don't spray or pour cleanser or water onto your LCD display or its case directly. When cleaning your LCD display, make sure that no liquid permeates into the inside of the LCD display or any accessory. Moisten a clean and soft lint-free cloth with water, ammonia-free water, or glass cleanser without alcohol, wrench it dry and wipe the surface of your LCD display gently. It is recommended to use a silk cloth that is exclusively used to clean the display. 1 Components and Accessories LCD Display (with speakers) LCD Display (without speakers) Signal Cable Quick Start Guide Quick Start Guide Power Cable Audio Cable (with speakers) Adaptor User's Manual (CD-ROM) (Potrans: UP04081120 or APD: DA-60F12) Usage Installation Guide Attention Note: Read the [Safety Rules] section carefully before starting the installation Before installing your LCD display, consider the following with reference to the space where the display is to be installed: To minimize the reflection of the display, protect your eyes and ensure premium quality, don't install your LCD display near windows or with backlight. Keep the display away from your eyes at least by 30 cm. to be warm white color Set up the color temp. to be cold white color Adjust red/green/blue gain Clock Pulse Horizontal Vertical N/A N/A Warm Color Temp. User Definition/Red User Definition/Green User Definition/Blue N/A N/A N/A N/A N/A N/A N/A N/A English Deutsch Français Español Italiano Select the language you want Horizontal Vertical OSD Time Display Auto Adjustment Move OSD left and right Move OSD up and down Adjust OSD time display settings Set up horizontal, vertical, sequence and focus automatically N/A (for analog input only) N/A Message Display resolution, H/V frequency and the input port used for current input timing function. Restore to factory settings N/A Restore N/A Exit Close the OSD window and save changes. 5 Attachment Plug and Play The product provides the latest VESA plug and play function to prevent complicated and time-consuming installation procedures. The plug and play function allows your computer system to identify the LCD display easily and set up the functions of the LCD display automatically. The LCD display transfers the Extended Display Identification Data (EDID) to your computer system via the Display Data Channel (DDC), so that your computer can use the self-setting function of the LCD display. Power Saver The LCD display has a built-in Power Control System (Power Saver). When the LCD display is not operated during a certain time, the Power Control System will brings the LCD display into low voltage status automatically to save power. Move the mouse slightly or press any key to return to the normal operation. The Power Saver function can only be operated by the display card of the computer system. You can set up this function from your computer. The LCD display is compatible with EPAENERGY STAR NÜTEK when used with VESA DPMS. [. . . ] To save power and extend the life of the product, turn off the LCD display power supply when it is not used or when remaining idle for a long time. Troubleshooting Power LED does not light Check that the power switch is turned on. Make sure that the power cable is connected. Icon off Check that the power switch is turned on. Ensure that the signal cable is inserted in the receptacle appropriately. The Power Saver may turn off the display automatically during the operation. [. . . ]