User manual ACER AL1911

[. . . ] Table of Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Viewing Angle Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Detaching LCD Monitor from Its Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Interface for Arm Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot. After you unpack the LCD Monitor, make sure that the following items were included in the box: * LCD Monitor * User's Manual * 1. 8M Monitor-to-PC VGA Cable * 1. 8M Power Cord * 1. 8M Stereo Jack Audio Cable If you find that any of these items is missing or appears damaged, contact your dealer immediately. Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +25°. (See fig. 1-1)& Left / Right -45° to +45° Figure 1-1 Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand. Detaching LCD Monitor from Its Stand Unscrew screws second. the swivel base support column and pull down the Figure 1-2 2 Interface for Arm Applications Before installing to mounting device, please refer to Fig. 1-2. The rear of this LCD display has four integrated 4 mm, 0. 7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-3. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2. 1 and 2. 1. 3, version 1, dated 13 November 1997). Note :Please using Ø 4mm x 8mm (L) screw for this application. Figure 1-3 Cable Installation Please follow these instructions to install the cables. Remove the back panel from the rear of the monitor. (See Fig. Place the signal cable, the audio cable into their correct socket. Figure 1-4 Connecting the Display to your Computer 1. Connect one end of the signal cable to the LCD Monitor's VGA port. Connect the other end of the signal cable to the VGA port on your PC. Make sure connections are secure. Figure 1-5 Attention: This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-core interface cable is included in the LCD Monitor package. This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used. Connecting the AC Power 1. Connect the power cord to the AC socket. Connect the power cord to an AC power source. Figure 1-6 Connecting the Audio Cable 1. Connect the audio cable to the "LINE OUT " jack on your PC's audio card or to the front panel's "AUDIO OUT" jack of your CD ROM drive. Connect the other end of the audio cable to the LCD Monitor's "LINE IN" jack. Figure 1-7 3 Setting Up the LCD Monitor 1. [. . . ] This function records the deviated number of clock period between input timing and supported timing. The clock value may not be"0" after Auto Adjustment when the input timing is different from supported timing. Push the ( ) button to select a different color temperature. (typical) Vertical: -85° ~ +85° Horizontal: -85° ~ +85° Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported Analog RGB 0. 7Vp-p 75 Ohm ± 2% Positive, Negative 0 - 0. 7 ± 0. 05 Vp Horizontal Frequency: 24 ~ 80 KHz Vertical Frequency: 56 ~ 75 Hz 500mVrms 1W+1W Audio Input Output Control Power switch (hard and soft types) On/Off switch with LED indicator OSD Brightness Contrast Horizontal Position Vertical Position Phase Clock Display Mode Setup OSD Format Digital Digital Digital Digital Digital Digital Use EEPROM to save settings in memory 20 characters x 9 rows Power Management Mode Power Consumption* On Off Soft switch off Disconnected Hard switch off 55W maximum 3W maximum 3W maximum 3W maximum AC Input 240 VAC 240 VAC 240 VAC 240 VAC LED Color Green Yellow Dark Yellow: Standby, Suspend, Off Dark: Power off Dark 1W maximum 100 VAC 1W maximum 240 VAC * Meeting VESA DPMS requirements measured from AC Input. 7 Sync Input Signal Polarity Plug & Play External Connection Power Input (AC input) Video Cable Audio Cable Separate TTL compatible horizontal and vertical synchronization Positive and negative Supports VESA DDC2B functions 1. 8M power cord 1. 8M with 15-pin D-sub connector 1. 8M with Stereo Jack Temperature Relative Humidity Temperature Relative Humidity 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 60° C/-4°F to140° F 5% to 85% Environment Operating Condition: Storage Condition: Input Voltage Input Current Dimensions Net Weight Gross Weight Power Supply (AC Input) Size and Weight Single phase, 100 ~ 240VAC, 50 / 60 Hz 1. 2 A maximum 433 (W) x 447 (H) x 235 (D) mm 7. 0 ± 0. 3 kg 9. 0 ± 0. 3 kg Pin Assignment 6 Signal PIN Description Red Green Blue Digital GND Digital GND Red Rtn Green Rtn Blue Rtn PIN 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 Signal Description +5V Hot Plug Detect NC SDA H. [. . . ]