User manual ACER ALTOS R360 F3

[. . . ] Extremely powerful The R360 F3 supports up to two Intel® Xeon® E5-2600 v3 product family processors, and high-performance DDR4 memory occupying twenty-four DIMM slots. Hard drives can be configured in 12Gb/s SAS RAID and SAS HBA for increased performance and data availability. In its 1U form factor, it packs the same computing power in half the space when compared to a 2U system. [. . . ] riser slot 1 6 Altos R360 F3 Specifications Onboard storage specifications Item Controller Simultaneous drive transfer channels Description Intel® C612 Platform Controller Hub 10 onboard SATA ports  AHCI SATA controller: 4 x SATA ports from the Mini SAS HD connector and 2 x SATA ports on the server board  AHCI sSATA controller: 4 x SATA ports from the Mini SAS HD connector on the server board. Setup through ROM based Array Configuration Utility Installation scripting support  AHCI (Advanced Host Controller Interface) Max throughput per channel Data transfer method Drive type supported RAID levels support RAID function support RAID OS support Additional features Onboard LAN specifications Item Controller Network interface Compatibility standards Manageability Virtualization acceleration Description Dual-port Intel® I350 Ethernet Controller (1GbE) or Dual-port Intel X540 Ethernet Controller (10GbE) 10Base-T / 100Base-TX / 1000Base-T / 10GBase-T  PCI-SIG SR-IOV implementation RJ-45 X540 (10GbE): CAT-6/CAT-6A I350 (1GbE): CAT-5/CAT-5e Connector Supported cable type Memory specifications and population Item Supported memory types Description  Integrated on-die thermal sensors (TROD) NOTE: Acer does not qualify mixed memory configurations of memory type, capacity or make. 7 Altos R360 F3 Specifications Item Population Description  Farthest fill first rule on any channel (populate blue slot / Slot 1 first)  install DIMMs in order (CPU-1: Channels A , B , C and D; CPU2: Channels E , F , G and H)  Only remove DIMM blanks when populating memory in that slot  Maximum of 8 ranks can be installed on any one channel  Do not mix DIMM types (RDIMM or LRDIMM) and frequencies or latencies within or across CPUs Population per CPU by DIMM type listed below. NOTE: Support for 16 / 32 / 64 GB DIMMs may vary by regional availability. A CPU must be populated for memory to be read. Memory support and population 8 Altos R360 F3 Specifications Independent mode: • • • • • • • • • • Also known as performance mode, each DDR channel is addressed individually via burst lengths of 8 bytes. All CPUs support SECDED ECC with x8 DRAMs. Also known as RAS mode, each pair of channels shares a Write Push Logic unit to enable lockstep. Channels are paired together as a domain. All CPUs support SDDC with x4 or x8 DRAMs. rAS mode that require matching populations. Same slot position across channels must hold the same DIMM type (ranks, banks, rows and column) For mirroring mode, the memory image in channel A is maintained the same as channel C and channel B is maintained the same as channel D. Therefore, the effective size of memory is reduced by one-half. The DIMM configuration in mirrored channels must be identical. [. . . ] It does not use the standard PCIe slot Management module Model Remote Management Module Activation Key Local Control Panel Function Enables remote iKVM Enhances the manageability Service and support Acer Servers offer a comprehensive service suite to take care of daily IT needs. Users can select the 3-year standard warranty or choose extended warranties and services. In a continuing effort to improve the quality of our products, information in this document is subject to change without notice. [. . . ]