User manual ACER ASPIRE 4625G

[. . . ] Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Aspire 4715Z/4315 Series Notebook PC Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] Make sure that the printer cable is connected securely to the computer's parallel port or a USB port and the corresponding port on the printer. I want to set up my location to use the internal modem. To properly use your communication software, you need to set up your location: 1 2 3 Click on Start, Control Panel. Double-click on Phone and Modem Options. Begin setting up your location. Refer to the Windows manual. Note: Please note, on first booting your notebook, that you can skip the Internet Connection setup, as it is not necessary to complete the installation of your Operating System. After the Operating System is set up, you can proceed with the Internet Connection setup. 37 I want to restore my computer to its original settings without recovery CDs. Note: If your system is the multilingual version, the operating system and language you choose when you first turn on the system will be the only option for future recovery operations. This recovery process helps you restore the C: drive with the original software content that is installed when you purchase your notebook. Follow the steps below to rebuild your C: drive. (Your C: drive will be reformatted and all data will be erased. ) It is important to back up all data files before using this option. Before performing a restore operation, please check the BIOS settings. 1 2 3 Check to see if Acer disk-to-disk recovery is enabled or not. Make sure the D2D Recovery setting in Main is Enabled. The system will reboot. English Note: To activate the BIOS utility, press <F2> during POST. To maximize your battery's life, you are advised to adhere to the recommendations set out below. Conditioning a new battery pack Before you use a battery pack for the first time, there is a "conditioning" process that you should follow: 1 2 3 4 5 6 Insert the new battery without turning the computer on. Connect the AC adapter and fully charge the battery. Turn on the computer and operate using battery power. Fully deplete the battery until the battery-low warning appears. Reconnect the AC adapter and fully charge the battery again. English Battery pack English 40 Follow these steps again until the battery has been charged and discharged three times. Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time. If the computer is to be stored for more than two weeks, you are advised to remove the battery pack from the unit. English Warning: Do not expose battery packs to temperatures below 0°C (32°F) or above 45°C (113°F). Extreme temperatures may adversely affect the battery pack. By following the battery conditioning process you condition your battery to accept the maximum possible charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery. In addition, the useful lifespan of the battery is adversely affected by the following usage patterns: · Using the computer on constant AC power with the battery inserted. If you want to use constant AC power, you are advised to remove the battery pack after it is fully charged. [. . . ] Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. English Laser compliance statement English 78 English Radio device regulatory notice Note: Below regulatory information is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Below information is for products with such devices. European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: · Article 3. 1(a) Health and Safety · · · · EN60950-1:2001 EN50371:2002 EN50360:2002 (Applied to models with 3G function) EN301 489-1 V1. 4. 1:2002 EN301 489-17 V1. 2. 1:2002 EN301 489-3 V1. 4. 1:2002 (Applied to models with 27MHz wireless mouse/keyboard) EN301 489-7 V1. 2. 1:2002 (Applied to models with 3G function) EN301 489-24 V1. 2. 1:2002 (Applied to models with 3G function) EN300 328 V1. 5. 1:2004 EN301 893 V1. 2. 3:2003 EN300 220-1 V1. 3. 1:2000 (Applied to models with 27MHz wireless mouse/keyboard) EN300 220-3 V1. 1. 1:2000 (Applied to models with 27MHz Article 3. 1(b) EMC · · · · · · Article 3. 2 Spectrum Usages · · · · 79 · · · EN301 511 V9. 0. 2:2003 (Applied to models with 3G function) EN301 908-1 V2. 2. 1:2003 (Applied to models with 3G function). [. . . ]