User manual ACER ASPIRE E1-570G ǔ

[. . . ] Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support. Com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: ACERTeK Computer Inc. [. . . ] Hyper-threading [Enabled] [Enabled] Allows a hyper-threading processor to appear as two logical processors, allowing the operating system to schedule two threads or processes simultaneously. Active Processor Cores [All] Chapter 3 3-26 Allows you to choose the number of CPU cores to activate in each processor package. configuration options: [All] [1] [2] [3] [Enabled] Limit CPUID Maximum [Disabled] [Disabled] Disables this function. Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. chapter 3: BIOS setup Execute Disable Bit [Enabled] [Enabled] [Disabled] [Enabled] Enables the No-Execution Page Protection Technology. Forces the XD feature flag to always return to zero (0). Intel® Virtualization Technology [Disabled] [Disabled] [Enabled] Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Hardware Prefetcher [Enabled] [Disabled] [Enabled] Allows a hardware platform to automatically analyze the requirements and prefetch data and codes for the CPU. ] Allows you to select the performance state that the BIOS will set before OS handoff. Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance] Dynamic Storage Accelerator [Disabled] Configuration options: [Enabled] [Disabled] Allows you to enable or disable the Dynamic Storage Accelerator for C state configuration. CPU Power Management Configuration The subitems in this menu allows you to manage and configure the CPU’s power. The value ranges from 0 (Immediately) to 120 minutes Active Page Threshold Support [Enabled] Allows you to enable or disable the IRST with additional partition size. Configuration options: [Enabled] [Disabled] Ensure that the caching partition size is larger than the total memory size. Active Memory Threshold [0] This item appears only when you set the Active Page Threshold Support to [Enabled]. This item allows you to allocate a partition size for Active Page Threshold. hybrid Hard Disk Support [Disabled] Allows you to enable or disable Hybrid Hard Disk support. Configuration options: [Enabled] [Disabled] ISCT Support [Disabled] Intel (R) Smart Connect Technology ACER ASPIRE E1-570G 3-29 Chapter 3 Allow you to enable or disable the Intel® Smart Connect Technology. 3 While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. SATA Configuration SATA Mode Selection [AHCI] [Disabled] [IDE] Allows you to set the SATA configuration. [AHCI] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. [. . . ]