User manual ACER ASPIRE G3760

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondense concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Acer WT 300 User's Guide Model Number Serial Number Purchase Date :_________________________________ :_________________________________ : _________________________________ Place of Purchase : _________________________________ All trademarks, registered trademarks and/or service marks are the properties of their respective owners. Wbt. book Page iii Monday, August 2, 1999 4:07 PM iii Notices FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. [. . . ] Some dialog boxes are informational and require no user input. Other dialog boxes will prompt you for network and display information. Click on the "Next" or "Accept" buttons to display the next dialog box in the sequence. Click on the Back command button to return to the previous dialog box. Click on Cancel to quit and display the Terminal Connections Manager. Following are the dialog boxes of the Setup Wizard. Wbt. book Page 16 Monday, August 2, 1999 4:07 PM 16 Chapter 1 Getting Started Press next to go to the next screen. Read the end user's license agreement carefully, press "Accept" to go to the next screen. Wbt. book Page 17 Monday, August 2, 1999 4:07 PM 17 If you choose the "Yes, use the IP information supplied by DHCP" you will go directly to the dialog box where you provide the IP information. Choosing the "No, I will enter status IP information" option, press next and you will be asked to supply IP address, Subnet Mask and Gateway. If you do not know the information, you can ask your network administrator for the necessary information. Wbt. book Page 18 Monday, August 2, 1999 4:07 PM 18 Chapter 1 Getting Started After supplying the necessary information, press "Next", and you will have to supply additional information as shown below. Wbt. book Page 19 Monday, August 2, 1999 4:07 PM 19 When the necessary information is supplied, choose "Next" to set your video display resolution. The screen below shows the current setting of the video display resolution. Note: Make sure the resolution you select is supported by you monitor, otherwise your monitor will only display a blankscreen. After choosing your video display resolution, choose next and click on "Finish" to finish the setup. A dialog box will be displayed asking you if you want to keep the selection. Choose "OK" to keep the selection or "Cancel" to pick another one. Wbt. book Page 20 Monday, August 2, 1999 4:07 PM 20 Chapter 1 Getting Started If you choose "OK" the following screen will be displayed saying that you have successfully completed the Setup Wizard. Click "Finish" to apply the settings that you have chosen. After clicking the "Finish", you will be asked to restart the system in order for the settings to take effect. To use Auto-Locate, your Windows CE device and the Citrix server you want to connect to must be on the same local network. If you are on another network (for example, if you are on the other side of a router, across the Internet, or connected by RAS) you must enter the IP address or DNS name of a Citrix server on the network that contains the Citrix server you want to connect to. Click "Add" and enter the IP address or DNS name of any Citrix Wbt. book Page 27 Monday, August 2, 1999 4:07 PM 27 server on the remote network. The Select a Citrix Server or Published Application screen reappears. Scroll through the list and select the name of the Citrix server or published application you want to connect to. Click "Next" to continue. 6. The Specify an Application screen will appears and in the Command Line field, enter the path and name of an application to run on the server once the logon to the Citrix server is successful. Leave this field blank to run a Windows NT desktop on the Citrix server. Working Directory lets you associate a directory with the application specified in the Command Line field. Enter the drive and path of the working directory in the Working Directory field. For example, if the application Notepad. exe is in the C:\WTSRV directory on the Citrix server, type C:\WTSRV\Notepad. exe in the Command Line field. If you use Notepad to work on documents in the C:\My Documents directory, type C:\My Documents in the Working Directory field. [. . . ] Press "Ctrl+Alt+ v " ( arrow up) to proceed to the previous session. Wbt. book Page 33 Monday, August 2, 1999 4:07 PM 33 Terminal Properties Terminal Properties is used to change the setting of the terminal. This sections guide you through the steps on some of the features of Terminal Properties. Everytime you press the F2 function key, the following screen will be displayed: a. You can either click on okay to start your system or you can pick one of the options on top of the dialog box. 2. Click on the "Input" option to choose the input devices for your system. The following screen shows the information of the input devices that you can set. Wbt. book Page 34 Monday, August 2, 1999 4:07 PM 34 Chapter 1 Getting Started 3. You can also choose the display option to set the video display resolution and to enable the screen saver. Note: Make sure the resolution you select is supported by you monitor, otherwise your monitor will only display a blankscreen. Wbt. book Page 35 Monday, August 2, 1999 4:07 PM 35 4. Click on the "Network" option to specify another network settings. [. . . ]