User manual ACER ASPIRE V3-731 QUICK START GUIDE

[. . . ] 52 CDs, DVDs, and Optical Drives. . . . . . . . . . . . . . . . 55 Inserting and Ejecting CDs or DVDs . . . . . . . . . . . . . . . . . . . . . . . 56 Copying and Playing CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Playing CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Copying files to a CD-RW or CD-R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To insert a floppy disk 1 2 Hold the floppy disk with the label facing up. Push the floppy disk into the drive until it clicks into place. stro p BSU e v i r d k si d y p p o l F 113 VAIO Computer Quick Start Inserting a Floppy Disk Do not open the shutter manually and touch the surface of the floppy disk. To remove a floppy disk 1 2 Close all programs that were opened from the disk and wait for the LED indicator to turn off. Push the Eject button, and remove the disk. To avoid losing data, do not push the Eject button when the LED indicator is on. Removing a Floppy Disk Notes on handling floppy disks Do not open the shutter manually and touch the surface of the floppy disk. Keep floppy disk away from direct sunlight and other heat sources. 114 k si d y p p o l F rot acidni DEL nottub t cejE evi rd ksid yp polF Using Floppy Disk Drives Disconnecting a floppy disk drive You can disconnect a floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect a floppy disk drive 1 2 3 4 5 6 Close any active programs to prevent data loss. Double-click the Safely Remove Hardware icon Safely Remove Hardware window appears. The Click to select the floppy disk drive in the Hardware devices window, if it is not already selected. The Stop a Hardware device window appears. Make sure the appropriate device is selected, and click OK. A message appears stating it is safe to remove the hardware device. Point to Sony Notebook Setup, and click Sony Notebook Setup. The Sony Notebook Setup dialog box appears. To insert a PC Card 1 2 Make sure the front label of the PC Card is facing up. The PC Card is automatically detected by your system. The Safely Remove Hardware icon appears on the taskbar, indicating your system detected the PC Card. 117 VAIO Computer Quick Start Do not force a PC Card into the slot. When a PC Card is inserted, do not place your computer in a bag or case. Pressure or shock to a PC Card may damage your computer. Touching the head of the PC Card will not damage the connector pins, but damage may occur if the head of the PC Card is sticking out of the PC Card slot while the computer is being transported. Inserting a PC Card Removing PC Cards You can remove PC Cards while the computer is on or off. PC Cards draw power from the computer when they are inserted into the PC Card slot, whether or not you use the card. If you are not using your PC Card and you are using a battery as a power source, remove the PC Card from the PC Card slot to conserve battery power. To remove a PC Card while your computer is on 1 2 3 Double-click the Safely Remove Hardware icon Safely Remove Hardware dialog box appears. The Click to select the PC Card in the Hardware devices window, if it is not already selected. [. . . ] Do not touch the media connector with your finger or metallic objects. Do not attach labels other than the supplied label to a media. 210 Troubleshooting Memory Stick Media Do not bend, drop, or apply strong shock to the media. Do not allow the media to get wet. How do I extend the life of the Memory Stick media? Use the supplied storage case. See the instructions that came with your media for more information on its use. [. . . ]