User manual ACER ASPIRE V5-431P

[. . . ] For your convenience, we suggest that you enter the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Acer Aspire easyStore Model number: __________________________________ Serial number: ___________________________________ Purchase date: ___________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] This IP address is usually your home network router IP address. This function cannot be used unless the DHCP Client function is disabled. Modify You will need to click this button to send the configuration you updated to the Aspire easyStore. If you leave this page before clicking the Modify button, all changes you made 13 Aspire easyStore will be lost. Drive Mapping To use this page, you will need to select any Aspire easyStore found by this utility on the Search Device page first. Share Names All available shared folders on the Aspire easyStore you selected on the Search Device page will be displayed here. Available Drive Letters easySearch list all available drive letters on your computer here. Map Drive To map a shared folder on Aspire easyStore to a mapped drive inside your computer, you will need to select an available shared folder displayed in Share Name, then choose an available drive letter you like, and click the Map Drive button. The easySearch utility will automatically create a permanent drive inside your computer. Please note, if you change the IP address after you map a shared folder to drive, the drive will not get updates to the new IP address automatically. You will need to disconnect it first, then map the drive again. Disconnect Drive To disconnect any mapped drive, you will first need to select the shared folder in the Share Names page, then click Disconnect Drive. You can enter any password you like between 5 to 16 characters. Please note, the password is case sensitive and cannot contain the following special characters \ / : * ?; + = ~ \' [ ] { } @ # ()!^$%&, _- 2. The default time zone is GMT (Greenwich Mean Time). 3. Set the IP address of your Aspire easyStore. 4. Set the device name, description and its workgroup. 20 Aspire easyStore 5. Finally, confirm all changes and restart the Aspire easyStore to effect the changes. After the system reboots, you will be brought back to the login page of the Aspire easyStore. Please log in with the new password you set in the first step of the device setup wizard and click Login. On the left side of the screen, there are three options: Wizards The first page after you login. All current user accounts of Aspire easyStore will be listed on this page and you can create additional users through the User/Share Folder Wizard. Advanced Advanced configuration of Aspire easyStore. Detailed information will be provided in the next chapters. 21 Aspire easyStore Logout Once you finish configuring Aspire easyStore, you can click on Logout to leave the web UI. [. . . ] Click the Save settings button on the lower-right corner Please do not power-off Aspire easyStore during the upgrade process; otherwise, it may render your Aspire easyStore useless. After you have successfully upgraded the firmware, click the Restart button on the lower-right corner to restart the system. 56 Aspire easyStore Restarting Aspire easyStore There are two ways to restart Aspire easyStore. The first is using the power switch at the back of Aspire easyStore. Press the power switch to switch off the Aspire easyStore. [. . . ]