User manual ACER ASPIRE V5-473P ǔ

[. . . ] Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead. Indd i 2/27/13 9:21:14 AM The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. [. . . ] (or) Press and hold E / F (or 2 / 3 on RM-RK52) until “M” flashes, then press repeatedly to search for a station manually. Store a station You can store up to 18 stations for FM and 6 stations for AM. (or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob. The preset number flashes and “MEMORY” appears. 2 Turn the volume knob to select a preset number, then press the knob. Search for your favorite program (PTY Search) Available only for FM Radio Data System stations. 2 Turn the volume knob to select a PTY code (➜ 7), then press the knob. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. 2 Turn the volume knob to select [TUNER], then press the knob. 3 Turn the volume knob to make a selection (see the table below and on page 7), then press the knob. Use a 3-core plug head stereo mini plug for optimum audio output. Use a Bluetooth® device 1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased). Blue/white Black Brown Auxiliary input jack Wiring harness of the unit (➜ 13) Blue/white: Remote Black: Ground Brown: Tel muting 2 3 4 5 Register (pair) the Bluetooth device with KS-BTA100. For details, refer to the instruction manual of KS-BTA100. Indd 7 2/27/13 9:20:40 AM AUDIO SETTINGS To Select a preset equalizer Store your own sound settings Do this Press EQ repeatedly. LOW / HIGH: Boosts low or high frequencies to produce a wellbalanced sound at low volume. €05 — +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. W / REAR: Selects whether rear speakers or a subwoofer are connected to the REAR/SW line out terminals on the rear panel (through an external amplifier). oN / OFF: Turns on or off the subwoofer output. THROUGH: All signals are sent to the subwoofer. [. . . ] Indd 10 2/27/13 9:20:41 AM SPECIFICATIONS Power Output Continuous Power Output (RMS) Audio amplifier Load Impedance Frequency Response Signal-to-Noise Ratio Line-Out, Subwoofer-Out Level/ Impedance Output Impedance FM Frequency Range 50 W per channel CD player 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at less than 1% total harmonic distortion 4 Ω (4 Ω to 8 Ω allowance) 40 Hz to 20 000 Hz 70 dB For KD-R647 / KD-R641 / KD-R547 / KD-R541 / KD-R449: 2. Indd 11 2/27/13 9:20:41 AM INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. € Disconnect the battery’s negative terminal before wiring and mounting. € Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. [. . . ]