User manual ACER ASPIRE V5-572P

[. . . ] Dispose of these in the containers provided for this purpose. Once worn out, your electrical device should not be disposed of with your usual household refuse. Use a pair of pliers to cut the electric cable to prevent it from being reused. Dispose of the device at an approved collection centre in the container provided for this purpose so that it can be re-processed. [. . . ] Remove, shake it for a few seconds and wait for the resultant colour change (approximately 1 minute). 1 or 1 1/2 mauve squares : you can use tap water. 2 or more mauve squares : we advise you to use distilled water for irons. € Replace the re s e rvoir by pushing it right into its housing. Listen for a click to ensure that the tank is correctly engaged. Never fill the reservoir with hot water Never add products containing alcohol or essences (perfume, eau de Cologne, lavender essence…) to the water. REFILLING WITH WATER WHILST IRONING • You can refill the reservoir during ironing. You do not need to unplug the appliance, and can immediately re-commence ironing. THERMOSTAT ADJUSTMENT • Adjust the thermostat of the iron according to the fabric. € To use steam please ensure that the thermostat dial is set within the 2 and 3 dot settings. TO OPERATE - HEATING PROCESS • Plug the power cable into an earthed socket. € Move the iron from top to bottom, keeping the steam button pressed. For best results, the material to be steamed should be taught. € The results vary according to the type of fabric. STORAGE • After ironing, press the On/Off button to switch the appliance off. Unplug the power cable and let your appliance cool. You can then store the whole unit flat without emptying the tank. € If you lie the machine on its side, water from the container may spill out. - 19 - With tap water : Scaling is no longer a problem thanks to the anti-scaling cartridge. Please remember, the grains will progressively change colour and they lose their efficiency. The cartridge needs replacing when the change in colour is on the top. Each time you fill the water tank, check the anti-scaling cartridge. [. . . ] The EMC system therefore eliminates any risk of scaling. Anti-scale cartridge change indicator light A) When the anti-scale cartridge begins losing its effectiveness, the EMC system is activated. 1 indicator light begins flashing to indicate that the cartridge must be changed soon. B) If the water-softening cartridge is not changed, the EMC system itself stops the production of steam after a certain amount of ironing time. [. . . ]