Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ACER ASPIRE V7-482P. We hope that this ACER ASPIRE V7-482P user guide will be useful to you.
Lastmanuals help download the user guide ACER ASPIRE V7-482P.
You may also download the following manuals related to this product:
ACER ASPIRE V7-482P (4662 ko)
Manual abstract: user guide ACER ASPIRE V7-482Pǔ
Detailed instructions for use are in the User's Guide.
[. . . ] Be sure use three screws for each speaker. 2 Choose a speaker cord by matching the color of the label on the back of a speaker with the speaker cord’s connector (see below). [. . . ] Fold the speaker cord () over about 70 cm and twist it. Thread the speaker cord up through the base () and out the top of the lower part of the speaker (). Front left speaker (L): White Surround left speaker (L)*: Blue Front right speaker (R): Red Surround right speaker (R)*: Gray
2
To install speakers on a wall and satellite speaker on the stand, see the reverse side.
Note on carrying the subwoofer Remarque relative au transport du caisson de graves Nota sobre el transporte del altavoz de graves
3 Place the upper part of the speaker ( and *) onto the lower part of the speaker (). Then secure the upper and lower parts of the speaker with a screw (). 5 Remove any slack from the speaker cord () by pulling it from below the base (), and then slide the speaker cord into the indentation at the rear of the upper part of the speaker ( and *). For the satellite speakers (Except for BDV-N9100W/N9100WL) Pour les enceintes satellite (sauf pour BDV-N9100W/N9100WL) Para los altavoces satélite (excepto BDV-N9100W/N9100WL)
2
A
1 Tread the speaker cord (C) through the hole of the stand (B) and connect the speaker cord to the speaker (A). For BDV-N7100WL only: Connect the speaker illumination connector (attached with the speaker cord (C)) to the speaker (A). 2 Attach the speaker (A) to the stand (B) by matching the holes at the bottom of speaker with the catchers on the stand. Then adjust the speaker and stand until they fit into place. 3 Secure the speaker and stand with a screw (D) and attach the screw hole cover (E). Then secure the speaker cord in the speaker cord holder. [. . . ] 3 Secure the speaker and stand with a screw (D) and attach the screw hole cover (E). Then secure the speaker cord in the speaker cord holder. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER ASPIRE V7-482P
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER ASPIRE V7-482P will begin.
ACER ASPIRE V7-482P (4662 ko)
