User manual ACER ASPIRE Z3-615

[. . . ] L, Via Lepetit, 40, 20020 Lainate (MI) Italy Aspire AZ3-615 2014 158 kWh/year Integrated desktop computer C D 188 kWh/year 215 kWh/year Not applicable adjustments when discrete graphics cards Not applicable are enabled (from 1 July 2014) ETEC allowance with capability 112 kWh/year 134 kWh/year adjustments when discrete graphics cards are disabled (from 1 January 2016) ETEC allowance with capability adjustments when discrete graphics cards Not applicable are enabled (from 1 January 2016) Whether all discrete graphics card are No enabled during the test Whether switchable graphics mode with Not applicable UMA is driving the display during the test ETEC of highest power-demanding 70. [. . . ] 354 Watt demand Maximum power demand Not applicable Internal power supply (IPS) efficiency at 10 %, 20 %, 50 % and 100 % of rated output power External power supply's (EPS) average active efficiency Noise levels (the declared A-weighted sound power level, LWAd) of idle mode Noise levels (the declared A-weighted sound power level, LWAd) of "HDD random seek" mode Minimum number of loading cycles that the batteries can withstand Configuration of memory Not applicable 2G Not applicable Not applicable No Not applicable 65. 6 B Not applicable 4~8GB Configuration of internal storage Configuration of discrete television tuner Configuration of discrete audio card Configuration of discrete graphics cards Configuration of discrete graphics cards category The battery in this product cannot be easily replaced by users themselves For products with an integrated display, the total content of mercury is 1 piece 0 piece 0 piece 0 piece Not applicable Not applicable 0 mg 1 piece 0 piece 0 piece 0 piece Not applicable Not applicable 0 mg 1 piece 0 piece 0 piece 1 piece G1 Not applicable 0 mg COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign Measurement methodology for ETEC requirements for computers and computer servers: ANNEX II Ecodesign requirements and timetable: 1. Power supplies — Determination of no-load power and average efficiency of active modes. Method for determination of sound power levels of equipment in reverberation test rooms; 7. Method for determination of sound power levels of equipment under essentially free-field conditions over a reflecting plane; Annex C. 15 Equipment category: personalcompute rs and workstations. [. . . ] Measuring off mode; Sequence of events required to reach the ENERGY STAR® Program Requirements Product Specification mode where the equipment automatically for Computers, Eligibility Criteria Version 6. [. . . ]