User manual ACER ASPIRE Z3-711

[. . . ] Technical Documentation of (EU) No 617/2013 Product type Product category Manufacturer name, address Product model number Year of manufacture ETEC allowance with capability adjustments when discrete graphics cards are disabled (from 1 July 2014) ETEC allowance with capability adjustments when discrete graphics cards are enabled (from 1 July 2014) ETEC allowance with capability adjustments when discrete graphics cards are disabled (from 1 January 2016) ETEC allowance with capability adjustments when discrete graphics cards are enabled (from 1 January 2016) Whether all discrete graphics card are Yes enabled during the test Whether switchable graphics mode with Not applicable UMA is driving the display during the test ETEC of highest power-demanding configuration Idle state power demand Sleep mode power demand Sleep mode with WOL enabled power demand Off mode power demand Off mode with WOL enabled power demand Maximum power demand Internal power supply (IPS) efficiency at 10 %, 20 %, 50 % and 100 % of rated output power External power supply's (EPS) average active efficiency Noise levels (the declared A-weighted sound power level, LWAd) of idle mode Integrated desktop computer B Acer Italy s. [. . . ] Measurement methodology for off mode Measurement methodology for IPS efficiency Measurement methodology for EPS efficiency ECMA-109 2nd edition (December 1987) Declared Noise Emission Values of Computer and Business Equipment: 4. Determination of the declared noise emission values. ECMA-74 11th edition (December 2010) Measurement of Airborne Noise emitted by Information Technology and Telecommunications Equipment: Measurement methodology for noise level 5. installation and operating instructions; 6. Method for determination of sound power levels of equipment in reverberation test rooms; 7. Method for determination of sound power levels of equipment under essentially free-field conditions over a reflecting plane; Annex C. [. . . ] Sequence of events required to reach the mode where the equipment automatically Not applicable changes to off mode The duration of idle state condition before the computer automatically reaches sleep mode, or another condition which does 30 minutes not exceed the applicable power demand requirements for sleep mode The length of time after a period of user inactivity in which the computer automatically reaches a power mode that 30 minutes has a lower power demand requirement than sleep mode The length of time before the display sleep mode is set to activate after user inactivity User information on the energy-saving potential of power management functionality User information on how to enable the power management functionality Test parameter for ambient temperature Test parameter for test voltage Test parameter for frequency Test parameter for total harmonic distortion of the electricity supply system Test parameter for information and documentation on the instrumentation, set-up and circuits used for electrical testing 10 minutes http://www. [. . . ]