User manual ACER AT2620 QUICK START GUIDE

[. . . ] After entering the stations in the memories, the unit will automatically begin scanning the pre-sets for 5 seconds each so they may be heard. Press the pre-set button of the desired station or use any other tuning function to stop the scanning function. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store feature will erase those stations and enter the new strong stations. The feature is most useful when traveling in a new area where you are not familiar with the local stations. 6manually select a radio TUNING MANUAL UP/DOWN To station frequency, rotate the knob to the right. [. . . ] Pressing the button will select the Local setting ("LOC" will appear on the display panel) and only strong (local) stations will be received. Pressing the button again will select the Distant setting ("LOC" will disappear from the display panel) and the radio will stop at a wider range of signals, including weaker (more distant) stations. -2- blSTATIONPRE-SETMEMORIESbuttons, use the following To set any of the 6 pre-set memory procedure: 1. Turn the unit on and select the desired band. Select the first station to be pre-set using the Manual Up/Down or Automatic Seek Tuning functions. Press the pre-set button to be set and continue to hold the button in. The volume will momentarily mute and then return and the pre-set number will appear on the display panel. The station is now set into the memory of that pre-set button and can be re-called by momentarily pressing the button. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. NOTE: Observe cassette operation cautions in Care and Maintenance section of this manual. 6 7 boFAST-FORWARD/EJECTBUTTONeject a cassette, simply This button performs two functions. To depress the button fully then release. The cassette will eject and radio operation will resume. To fast-forward the tape, depress the button half-way in to the locked position. 50 dB 0. 25% WRMS *Specifications are subject to change without notice. -5- CARE AND MAINTENANCE The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. Purchase a cassette cleaning kit from your local retail store. At least every 20 to 30 hours of operation you must clean the cassette mechanism. A dirty cassette player will have a poor sound. Do not use cassettes that exceed 45 minutes of play on each side. Do not insert a cassette that appears to be broken, twisted or dirty or with loose or torn labels on it. Always keep your cassettes away from direct sunlight or exposure to sub-freezing conditions. If a cassette is cold, allow it to warm up before use. [. . . ] dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. [. . . ]