User manual ACER AT4258ML

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are indicated on the label affixed to your device. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. [. . . ] 20 POSITION When in PIP mode: Change subscreen position. M 17 W E 21 21 SIZE/MODE When in PIP mode: Change subscreen size. When in POP mode: Switch POP mode from 1+5 to 1+12. See page 14. I 1 1 2 3 Colour buttons (R/G/Y/B) Operates corresponding button on the teletext page. INDEX Press to go to the index page SIZE Press once to zoom teletext page to 2X. SUBTITLE Press to view subtitles on the screen. SUBPAGE Press to access the teletext's subpages directly. HOLD Press to pause the current teletext page in multi-page viewing mode. REVEAL Press to reveal hidden telext information. 4 7 HOLD 5 6 4 5 6 7 5 Acer. TV. AU. UK. indb 5 6/22/2006 6:33:59 PM English Basic connections Connecting the power cord 1 2 Connect the AC cord into the AC input on the back of the set. Connect the plug to the wall outlet as shown. Setting up the remote control 1 2 Open the cover on the back of the remote unit. Insert two AAA batteries (supplied) to match the polarity indicated inside the battery compartment. Enjoying analog TV Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back of the TV set as shown below. Analog Getting started watching your TV Step 1. Select the setup language you prefer. 1 Step 2. Using the directional keys, select Audio from the onscreen display. Then navigate to the feature you wish to adjust. Use the left or right keys to adjust the sliding scale. The Audio menu can also be used to adjust the treble, balance, sound effects and other important sound-related settings Adjusting the channel management 1 2 3 4 Press the MENU key to bring up the OSD. Using the directional keys, select Channel management from the OSD. Use the directional keys to navigate the menus. The Channel management menu can be used to adjust frequency, and set the channel namings. Adjusting other options 1 2 3 4 Press the MENU key to bring up the OSD. Using the directional keys, select Options from the OSD. Use the directional keys to navigate the menus. The Options menu can be used to select the picture aspect-ratio mode, set the sleep timer and reset options. Adjusting the settings 1 2 3 Press the MENU key to bring up the OSD. Using the directional keys, select Settings from the OSD. [. . . ] If you need to reorder for new channels, please follow the steps below: Reordering for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. 3 Highlight Reorder. Then, select the channel you wish to reorder and press OK to confirm. Move to the right channel number and press OK to reconfirm. 4 16 Select OK and press MENU to exit. Acer. TV. AU. UK. indb 16 6/22/2006 6:34:23 PM Re-scan for channels English The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: Scanning for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. 3 Highlight Auto Scan. [. . . ]