User manual ACER B243H

[. . . ] 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Components and Accessories Usage Installation Guide Adjustment of Display Operation Adjustment of Screen Attachment Plug and Play Power Saver Troubleshooting Technical Specifications Display Mode Safety Rules Electrical Safety Note: To ensure your safety and prolong the life of the product, read the following safety rules carefully when you use the product for the first time. [. . . ] When installing your LCD display or adjusting its angle, attention shall be paid to the loading capability and leveling of the display. Cleaning Safety Don't spray or pour cleanser or water onto your LCD display or its case directly. When cleaning your LCD display, make sure that no liquid permeates into the inside of the LCD display or any accessory. Moisten a clean and soft lint-free cloth with water, ammonia-free water, or glass cleanser without alcohol, wrench it dry and wipe the surface of your LCD display gently. It is recommended to use a silk cloth that is exclusively used to clean the display. SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99. 99% or more. It may include blemishes of 0. 01% or less such as a missing pixel or a pixel lit all of the time. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours. 1 Components and Accessories LCD Display (with speakers) LCD Display (without speakers) Signal Cable Quick Start Guide Power Cable Audio Cable (with speakers) Adaptor User's Manual (CD-ROM) (Potrans: UP060B1190 or APD: DA-60F19) Usage Installation Guide Attention Note: Read the [Safety Rules] section carefully before starting the installation Before installing your LCD display, consider the following with reference to the space where the display is to be installed: To minimize the reflection of the display, protect your eyes and ensure premium quality, don't install your LCD display near windows or with backlight. to be warm white color Set up the color temp. to be cold white color Adjust red/green/blue gain Clock Pulse Horizontal Vertical N/A N/A Warm Color Temp. User Definition/Red User Definition/Green User Definition/Blue N/A N/A N/A N/A N/A N/A N/A N/A English Deutsch Français Español Italiano Select the language you want Horizontal Vertical OSD Time Display Auto Adjustment Move OSD left and right Move OSD up and down Adjust OSD time display settings Set up horizontal, vertical, sequence and focus automatically (for analog input only) N/A N/A Message Display resolution, H/V frequency and the input port used for current input timing function. Restore to factory settings N/A Restore N/A Exit Close the OSD window and save changes. 5 Attachment Plug and Play The product provides the latest VESA plug and play function to prevent complicated and time-consuming installation procedures. The plug and play function allows your computer system to identify the LCD display easily and set up the functions of the LCD display automatically. The LCD display transfers the Extended Display Identification Data (EDID) to your computer system via the Display Data Channel (DDC), so that your computer can use the self-setting function of the LCD display. Power Saver The LCD display has a built-in Power Control System (Power Saver). When the LCD display is not operated during a certain time, the Power Control System will brings the LCD display into low voltage status automatically to save power. Move the mouse slightly or press any key to return to the normal operation. The Power Saver function can only be operated by the display card of the computer system. You can set up this function from your computer. The LCD display is compatible with EPAENERGY STAR NÜTEK when used with VESA DPMS. [. . . ] Check the signal cable of the display and ensure that no pin is bent. Image Offset or wrong Size Press the auto adjustment button to optimize the screen automatically. Set up the reference position. 6 Technical Specifications Panel Dimension Max. Pixel Pixel Span LCD Panel Brightness (Back Light Source) Contrast LC Response Time Visual Angle Effective Display Signal Mode Input Signal SYNC Frequency Max. Pixel Clock Input Terminal Image Audio Diagonal 481. 4mm (19 inch) LCD display 1, 440 x 900/WXGA+ Up to 16. 2M true color Horizontal 0. 284mm x Vertical 0. 284mm 350 cd/m2 500 : 1 20 ms Horizontal 170° / Vertical 170° Horizontal 408. 24mm x Vertical 255. 15mm Simulated video frequency: 0. 7 Vpp, 75 (separate SYNC and composite SYNC) Horizontal 30kHz~82kHz x Vertical 56Hz ~76 Hz 135MHz D-Sub 15 PIN (VESA) Phone Jack, d=3. 5mm (Optional) AC100~240Volts, 50/60Hz 60W / Standby 3W 5 ~ 35 (operation)/ -20 ~ 55 (storage) 20% ~ 80% (operation)/ 20% ~ 85% (storage) 462 mm x 180mm x 385mm 4. 0 kg TCO99;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B; VCCI-B;CE/EMC;C-Tick; BSMI; ISO 13406-2;EPA; PCT;NOM Power Transformer Power Consumption Environmental Conditions Temperature Humidity Actual Dimension (W x D x H) Net Weight Safety Standard Lamp Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. [. . . ]