User manual ACER B326HUL QUICK START GUIDE

[. . . ] Search & Decide with Bing -- Find and organize the answers you need using Bing™, so you can make faster, more informed decisions. iii Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] • • Remove the screws on the chassis. Slide the panel off. Setting up new components You can only use components compatible with AcerSystem computers. Before you choose new components, please ask your authorized Acer dealer whether the part will operate within your AcerSystem system. In order to ensure proper setup and installation, please refer to the instructions provided with your new components. Probable upgrades are: • • • • Upgrade to high-capacity HDD Expand high-level memory Upgrade from a CD-ROM drive to CD-RW, DVD-ROM, DVD/CDRW combo or DVD writer (selected models only) Install additional interface cards in empty PCI slots, e. g. , PCI fax/ modem card (selected models only) Audio and Video Set up Procedures Audio output device priority: 6 Setting up your computer English After finishing setting up your operating system, the audio output priority will be as shown in the table below. • USB speakers and HDMI devices can support hot-plugging. Analog speakers will always be listed in the output device priority list regardless of the presence or absence of the speakers. Output device priority (if supported) 1st 2nd 3rd USB Speaker Analog HDMI Switching audio output • • Right-click the Volume icon in the taskbar Notification Area. Click Playback Device to open a window that displays the available devices. • Choose the device that you want to set as the default output device. Right-click on it, then click Set as Default Device. The default audio output device will be changed. 7 Setting up displays • Right-click on the desktop and choose Screen resolution. English • • Choose the monitor that you want to set as the primary monitor and check Make this my main display, then press Apply and OK to change the setting. The operating system files may be damaged or missing. Insert the start-up disk you created during Windows setup into the floppy drive and press Ctrl + Alt + Del to restart your computer. This will automatically diagnose your system and make necessary fixes. However, if the diagnostic utility still reports a problem, then you may have to perform the recovery process to restore your system to its original default factory settings. If the LED is lit, check the following: • • Note: For more information about recovering your system, refers to the RCD instruction sheet. Q: Nothing appears on the screen. A: Your computer's power management function automatically blanks the screen to save power. Just press any key to turn the display back on. If pressing a key does not work, you can restart your computer. If restarting your computer does not work, contact your dealer or the technical support center for assistance. 11 Q: The printer does not work. A: Do the following: • • • Make sure that the printer is connected to a power outlet and that it is turned on. Make sure that the printer cable is connected securely to the system's parallel port and the corresponding port on the printer. For additional information concerning the printer, refer to the printer's documentation. English Q: No sound comes out from the computer. [. . . ] The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. Digital audio output statement The optical connector contains no laser or light emitting diode (LED) more than Class I. Radio device regulatory notice Note: Below regulatory information is for models with wireless LAN and/or Bluetooth only. List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use. [. . . ]