User manual ACER C120

[. . . ] DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75. When using the projector in Europe: COMPLIANCE NOTICE This LCD Video Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. [. . . ] When SCART INPUT is set to ON, nothing is output to the external monitor. When SCART INPUT is set to ON, normal computer signals aren't projected. Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal. · Some AV devices equipped with the SCART terminal aren't compatible with this projector. · When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depending on the input signal in such cases. · When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited. Use to adjust the horizontal position of the image. Use to adjust the vertical position of the image. Use to synchronize the projector with the PC input signal so that the image is not blurred. Use to eliminate image noise such as wide stripes. This isn't a product malfunction. IMAGE CONTRAST BRIGHTNESS sRGB COLOR MATRIX COLOR TEMP. COLOR TINT SHARPNESS GAMMA MODE To control the white-to-black level of the image : Adjust CONTRAST in the IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS in the IMAGE menu. Press the % button to lighten the image and the $ button to darken it. To determine the intensity of the color : Adjust COLOR in the IMAGE menu. Press the % button to increase the amount of color in the image and the $ button to decrease it. To adjust the red-green color balance of the image : Adjust TINT in the IMAGE menu. Press the % button to increase the amount of green in the image and the $ button to increase the amount of red in the image. To adjust the detail and clarity of the image : Adjust SHARPNESS in the IMAGE menu. Press the % button to sharpen the image and the $ button to soften the image. Color temperature 1. [. . . ] In this case, adjust TRACKING in the SIGNAL menu. · TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are supplied to the VIDEO or S-VIDEO signal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPONENT terminal, the signal mode is indicated as 480i or 576i. EN ­ 32 Specification of RGB signals in each computer mode of the projector (For SL4U) Signal mode TV60, 480i(525i) TV50, 576i(625i) 1080i 60 (1125i 60) 1080i 50 (1125i 50) 1080i 50a (1250i 50) 480p (525p) 576p (625p) 720p 60 (750p 60) 720p 50 (750p 50) PC98 CGA70 CGA84 CGA85 VGA60 VGA72 VGA75 VGA85 VGA120 SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 SVGA95 SVGA120 XGA43i XGA60 XGA70 XGA75 XGA85 MAC13 MAC16 MAC19 HP75 resolution (H x V) ­ ­ ­ ­ ­ ­ ­ ­ ­ 640 x 400 640 x 400 640 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 640 x 480 832 x 624 1024 x 768 1024 x 768 horizontal frequency (kHz) 15. 73 15. 63 33. 75 28. 13 31. 25 31. 47 31. 25 45. 00 37. 50 24. 82 31. 47 37. 86 37. 86 31. 47 37. 86 37. 50 43. 27 61. 89 35. 16 37. 88 48. 08 46. 88 53. 67 59. 97 77. 11 35. 52 48. 36 56. 48 60. 02 68. 68 35. 00 49. 72 60. 24 62. 94 Vertical frequency (Hz) 59. 94 50. 00 60. 00 50. 00 50. 00 59. 94 50. 00 60. 00 50. 00 56. 42 70. 09 84. 13 85. 08 59. 94 72. 81 75. 00 85. 01 120. 17 56. 25 60. 32 72. 19 75. 00 85. 06 94. 89 119. 93 86. 96 60. 00 70. 07 75. 03 85. 00 66. 67 74. 55 75. 02 74. 92 Normal mode (H x V) 800 x 600 800 x 600 800 x 450 800 x 450 800 x 450 800 x 600 800 x 600 800 x 450 800 x 450 800 x 500 800 x 500 800 x 500 800 x 500 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 Real mode (H x V) ­ ­ ­ ­ ­ ­ ­ ­ ­ 640 x 400 640 x 400 640 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 640 x 480 800 x 600 800 x 600 800 x 600 *1 *1 *1 *1 *1 *1 *1 *1 *1 The Expand mode don't function with this signal. [. . . ]